Enclosures and housings
Rail-Mount Modular Organizer Set
- Bounding box
- 803.0 × 100.0 × 70.0 mm
- Engine
- Precision B-rep
- Parameters
- 45
- Published
- October 15, 2026
Download
Free to download and use. See the terms.
The prompt
make the connections cleaner and dont expose to much go with a uniform and even look and get some clearence at the rails so the glide on smoothly and change the rails to two small horizontal rails and add an angle to them so the modules cant fall of dont forget any point i said
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 160 mm | 80 – 400 |
| Base Width | 100 mm | 50 – 300 |
| Base Thickness | 6 mm | 2 – 20 |
| Base Corner Radius | 6 mm | 0 – 25 |
| Rail Spacing (center-center) | 30 mm | 10 – 120 |
| Rail Width (neck) | 6 mm | 2 – 20 |
| Dovetail Angle | 22 deg | 0 – 35 |
| Rail End Inset | 4 mm | 0 – 20 |
| Sliding Clearance | 0.3 mm | 0.1 – 1.5 |
| Socket Depth (max) | 4 mm | 1 – 12 |
| Wall Thickness | 2.4 mm | 1 – 8 |
| Floor Thickness | 3.5 mm | 1.5 – 10 |
| Print Layout Gap | 12 mm | 0 – 80 |
| Edge Rounding | 1.2 mm | 0 – 4 |
| Cup Diameter | 55 mm | 30 – 120 |
| Cup Height | 45 mm | 15 – 150 |
| Pot Bottom Diameter | 44 mm | 30 – 120 |
| Pot Top Diameter | 60 mm | 30 – 140 |
| Pot Height | 70 mm | 20 – 200 |
| Drain Hole Diameter | 6 mm | 0 – 20 |
| Tray Length | 90 mm | 30 – 250 |
| Tray Width | 55 mm | 24 – 200 |
| Tray Height | 22 mm | 8 – 120 |
| Stand Depth | 60 mm | 25 – 160 |
| Stand Width | 45 mm | 24 – 160 |
| Stand Height | 55 mm | 20 – 160 |
| Stand Base Height | 8 mm | 3 – 40 |
| Stand Lip Height | 30 mm | 5 – 120 |
| Bin Length | 90 mm | 30 – 250 |
| Bin Width | 55 mm | 24 – 200 |
| Bin Height | 40 mm | 10 – 160 |
| Bin Columns | 3 | 1 – 8 |
| Bin Rows | 1 | 1 – 6 |
| Small Bin Length | 60 mm | 30 – 200 |
| Small Bin Width | 45 mm | 24 – 160 |
| Small Bin Height | 30 mm | 10 – 140 |
| Small Bin Columns | 2 | 1 – 8 |
| Hook Base | 44 mm | 20 – 160 |
| Hook Height | 45 mm | 15 – 160 |
| Hook Arm Length | 40 mm | 15 – 160 |
| Comb Length | 70 mm | 30 – 200 |
| Comb Width | 45 mm | 24 – 140 |
| Comb Height | 30 mm | 10 – 120 |
| Comb Slots | 8 | 2 – 30 |
| Comb Slot Width | 3 mm | 1 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no