Brackets and mounts
RAGE MOD DISPLAY R2
- Bounding box
- 240.1 × 240.0 × 56.0 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Premium futuristic industrial desktop vape organizer: one unified FDM-printable body with two completely open 55 mm front terraces for ten box mods, a rear deck holding 15 atomizer holes, 10 drip tip holes, and three tube mod holders. Maximum 240 x 240 mm footprint.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 240 mm | 235 – 240 |
| Overall depth | 240 mm | 235 – 240 |
| Each display terrace depth | 54 mm | 52 – 56 |
| Step transition run | 4 mm | 3 – 4 |
| Lower terrace height | 22 mm | 18 – 28 |
| Upper terrace height | 40 mm | 35 – 48 |
| Technical deck height | 56 mm | 50 – 70 |
| Angular corner clip | 8 mm | 8 – 9 |
| Exterior corner radius | 4 mm | 3 – 6 |
| Side panel recess depth | 1.2 mm | 1 – 1.5 |
| Drip tip panel recess depth | 1.2 mm | 1 – 2 |
| Atomizer hole diameter | 25 mm | 24 – 25 |
| Atomizer hole depth | 14 mm | 12 – 15 |
| Atomizer entry chamfer | 1 mm | 0.8 – 1.2 |
| Drip tip hole diameter | 10 mm | 9 – 10 |
| Drip tip hole depth | 6.75 mm | 6.75 – 8 |
| Drip tip entry chamfer | 1 mm | 0.8 – 1.2 |
| Drip tip row pitch | 16 mm | 16 – 18 |
| Tube mod hole diameter (small) | 24 mm | 23 – 24 |
| Tube mod hole diameter (large) | 26 mm | 25 – 26 |
| Tube mod hole depth | 35 mm | 35 – 40 |
| Tube mod entry chamfer | 1.5 mm | 1.5 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
