Jigs and fixtures
Radial Roof Rafter Assembly
- Bounding box
- 13361.7 × 13361.7 × 3038.6 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- September 2, 2026
Download
Free to download and use. See the terms.
The prompt
The lengths below are the absolute minimum 3D bounding dimensions required to clear the lineal slope length plus a 400 mm eave overhang. Order standard commercial lengths to match these thresholds:Rafter Position 0 (Major Axis | 4 Pieces):Minimum Blank Length: 6,850 mm (Order 7.2 m commercial stock).True 3D Pitch: 22.7°Rafter Position 1 (Intermediate | 4 Pieces):Minimum Blank Length: 6,490 mm (Order 6.6 m commercial stock).True 3D Pitch: 24.2°Rafter Position 2 (Mid-Quadrant | 4 Pieces):Minimum Blank Length: 5,790 mm (Order 6.0 m commercial stock).True 3D Pitch: 27.6°Rafter Position 3 & 4 (Minor Axis | 4 Pieces total):Minimum Blank Length: 5,220 mm (Order 5.4 m commercial stock).True 3D Pitch: 31.2° to 32.0°
Parameters
| Name | Value | Range |
|---|---|---|
| Rafter Width | 45 mm | 30 – 100 |
| Rafter Depth | 200 mm | 100 – 300 |
| Apex Height | 2780 mm | 2000 – 4000 |
| Position 0 Length (Major Axis) | 7200 mm | 6000 – 8000 |
| Position 0 Pitch | 22.7 ° | 15 – 35 |
| Position 1 Length (Intermediate) | 6600 mm | 5500 – 7500 |
| Position 1 Pitch | 24.2 ° | 15 – 35 |
| Position 2 Length (Mid-Quadrant) | 6000 mm | 5000 – 7000 |
| Position 2 Pitch | 27.6 ° | 15 – 35 |
| Position 3 Length (Minor Axis) | 5400 mm | 4500 – 6500 |
| Position 3 Pitch | 31.2 ° | 15 – 40 |
| Position 4 Length (Minor Axis) | 5400 mm | 4500 – 6500 |
| Position 4 Pitch | 32 ° | 15 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl