Enclosures and housings
QIDI Box Open Frame Stand (Stage 1)
- Bounding box
- 360.0 × 300.0 × 392.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- October 9, 2026
Download
Free to download and use. See the terms.
The prompt
Overall target footprint: 360 mm wide × 300 mm deep. The height can be adjusted to match the reference proportions. Design requirements: Open-frame construction, not a closed box. Two front drawers that slide on integrated printed shelves. No metal drawer rails. Angled side supports with large diagonal through-slots. A ventilated front panel. Structural crossbars connecting the side supports. A flat, stable top platform for the QIDI Box. Dark main structure with lime-green accent parts. Divide the design into separate printable components. Use real solid CAD geometry with editable dimensions. Make all components physically connected where they are supposed to join. Include appropriate 3D-printing clearances for the drawers. Avoid floating, overlapping, or disconnected structural parts. First generate only the main frame and top platform. Do not add the drawers yet. Keep the overall width and depth as editable parameters. Show the model so I can inspect it before continuing.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Width | 360 mm | 150 – 900 |
| Overall Depth | 300 mm | 120 – 800 |
| Side Support Height | 380 mm | 120 – 900 |
| Side Panel Thickness | 12 mm | 4 – 30 |
| Front Edge Slant (pull-back at top) | 60 mm | 0 – 200 |
| Diagonal Slot Length | 240 mm | 40 – 400 |
| Diagonal Slot Width | 36 mm | 8 – 120 |
| Diagonal Slot Angle | 55 deg | 5 – 85 |
| Slot Centre (from front) | 150 mm | 30 – 500 |
| Slot Centre Height | 190 mm | 40 – 700 |
| Top Platform Thickness | 12 mm | 4 – 40 |
| Top Edge Chamfer | 4 mm | 0 – 10 |
| Front Panel Width | 330 mm | 50 – 900 |
| Front Panel Height | 80 mm | 20 – 300 |
| Front Panel Thickness | 6 mm | 3 – 20 |
| Front Panel Front Face Y | 48 mm | 0 – 400 |
| Vent Slot Count | 7 ea | 0 – 20 |
| Vent Slot Width | 10 mm | 2 – 40 |
| Vent Slot Height | 46 mm | 5 – 200 |
| Crossbar Section | 20 mm | 8 – 60 |
| Crossbar Length | 342 mm | 50 – 900 |
| Lower Crossbar Centre Height | 30 mm | 5 – 400 |
| Mid Crossbar Centre Height | 200 mm | 20 – 700 |
| Rear Crossbar Inset From Rear | 30 mm | 10 – 400 |
| Front Crossbar Inset From Front | 30 mm | 10 – 400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no