3D preview of Q.A.C. Quickie Inboard Front Wing Panel
Loading the interactive model…
Interactive 3D model of Q.A.C. Quickie Inboard Front Wing Panel

Brackets and mounts

Q.A.C. Quickie Inboard Front Wing Panel

1 views
Bounding box
300.0 × 220.0 × 26.4 mm
Engine
Precision B-rep
Parameters
11
Published
November 17, 2026

Download

Free to download and use. See the terms.

The prompt

Create the inboard section of the Q.A.C. Quickie front wing, from the fuselage attachment to the seam where the outer panel connects. Give it a smooth airfoil shape with a rounded leading edge and a thin trailing edge. Hollow out the wing and add an internal hexagonal honeycomb. Join the honeycomb walls to the upper and lower skins, and leave solid material around both mounting faces. Keep the outside of the wing smooth. Add a round hole through the middle. I’m assuming this is a passage for a carbon-fiber tube, so run it from the fuselage-side face to the seam and align it with the matching hole in the outer panel. Surround the hole with a solid sleeve. Join the nearby honeycomb walls to the sleeve and keep the passage clear. Set the hole diameter to fit your actual tube. Export the inboard panel as one solid STEP file in millimeters for SolidWorks.

Parameters

NameValueRange
Span length300 mm100 – 1000
Chord220 mm80 – 600
Max thickness ratio0.12 ratio0.06 – 0.2
Skin thickness2 mm0.8 – 5
Root solid length15 mm5 – 60
Seam solid length15 mm5 – 60
Honeycomb cell radius15 mm5 – 40
Honeycomb wall thickness1.5 mm0.4 – 5
Tube hole diameter12 mm4 – 18
Sleeve outer diameter20 mm8 – 40
Tube chord fraction0.35 ratio0.2 – 0.5

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.