3D preview of Pyramid Experimental Support Set
Loading the interactive model…
Interactive 3D model of Pyramid Experimental Support Set

Brackets and mounts

Pyramid Experimental Support Set

1 views
Bounding box
270.0 × 145.0 × 38.3 mm
Engine
Precision B-rep
Parameters
13
Published
November 16, 2026

Download

Free to download and use. See the terms.

The prompt

Create a 3D-printable experimental support assembly for a Great Pyramid model (145 × 145 mm base, 92.31 mm height). Produce THREE independent components: 1. Square base. 2. Central removable vertical pillar. 3. Removable experimental platform. 1. BASE - 145 × 145 × 5 mm. - Flat square plate. - Central mounting socket for removable pillar. - Pyramid must sit directly on the base. - Socket must not interfere with pyramid seating. 2. PILLAR - Vertical square cross-section: 5 × 5 mm. - Positioned precisely at X=0, Y=0. - Secure, removable connection to base. - Supports platform at the required height. 3. EXPERIMENTAL PLATFORM - 35 × 35 × 2.5 mm. - Perfectly horizontal. - Centred at X=0, Y=0. - Bottom surface at Z=30.77 mm, measured from the pyramid's bottom reference plane (Z=0). - Removable central socket connection to pillar. - Small central reference mark on upper surface. - Must not touch the pyramid's internal faces. GEOMETRY AND HEIGHT Pyramid specifications: - Base: 145 × 145 mm. - Height: 92.31 mm. - Face inclination: 51° 51′ 14.3″. - Centred apex. The platform must be positioned exactly one-third of the pyramid's height above its base. Important: The base is 5 mm thick. Account for this when calculating the pillar length. The platform's bottom must remain at Z=30.77 mm relative to the pyramid's base plane. Verify that the complete assembly fits inside the pyramid without interference. ### PRINTING Printer volume: 210 × 210 × 250 mm. - FDM-compatible, watertight, manifold geometry. - Use 0.2–0.3 mm clearance for removable connections. - Minimise or eliminate support requirements. - Orient components appropriately for printing. ### DELIVERABLES Export THREE separate STL files: 1. pyramid_experiment_base.stl 2. pyramid_experiment_pillar.stl 3. pyramid_experiment_platform.stl Also provide: - Assembled 3D preview. - Dimensioned technical drawing. - Exact calculated pillar length. - Platform Z-coordinate. - Geometric and mechanical fit verification. Do not merge the components. Each must remain independently printable and removable.

Parameters

NameValueRange
Base Plate Size145 mm80 – 200
Base Plate Thickness5 mm2 – 12
Base Corner Radius2 mm0 – 6
Pillar Square Section5 mm2.5 – 20
Platform Size35 mm15 – 80
Platform Thickness2.5 mm1.5 – 8
Platform Underside Height (above pyramid base plane)30.77 mm10 – 70
Socket Clearance per Side0.2 mm0.05 – 0.6
Platform Socket Depth1.25 mm0.5 – 6
Reference Mark Arm Length8 mm2 – 20
Reference Mark Slot Width0.5 mm0.2 – 2
Reference Mark Depth0.3 mm0.1 – 1
Exploded Layout Spacing90 mm40 – 200

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Pyramid Experimental Support Set - Free CAD Model (STEP, STL) | TextoCAD