Enclosures and housings
PVC Cell Battery Box with Cable-Outlet Lid
- Bounding box
- 177.0 × 127.0 × 134.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- October 14, 2026
Download
Free to download and use. See the terms.
The prompt
Part 1: Main Container. A rectangular box with 4mm wall thickness. Inner dimensions are 160mm length, 110mm width, and 120mm height. The base floor features a 2x3 grid of 6 circular pockets, 34mm in diameter and 8mm deep, to securely nest 1-inch PVC pipe cells. At 60mm height, a middle horizontal stabilizer plate features 6 aligned 34mm through-holes to keep the cells perfectly vertical and isolated. Part 2: Shoebox Lid with Cable Outlets. A matching overlapping lid with a 4mm wall thickness and a 15mm downward rim, designed with a 0.5mm clearance for a friction fit over the box. On one of the short sides of the lid's rim, add two U-shaped notches (5mm wide and 5mm deep) to serve as exit channels for the main positive and negative electrical wires.
Parameters
| Name | Value | Range |
|---|---|---|
| Inner Length (X) | 160 mm | 60 – 400 |
| Inner Width (Y) | 110 mm | 40 – 300 |
| Inner Height (Z) | 120 mm | 30 – 300 |
| Wall Thickness | 4 mm | 2 – 10 |
| Floor Thickness | 10 mm | 4 – 25 |
| Cell Pocket Diameter | 34 mm | 10 – 55 |
| Cell Pocket Depth | 8 mm | 2 – 20 |
| Cell Pitch along Length | 55 mm | 36 – 150 |
| Cell Pitch along Width | 55 mm | 36 – 120 |
| Stabilizer Plate Height | 60 mm | 10 – 200 |
| Stabilizer Plate Thickness | 4 mm | 2 – 12 |
| Stabilizer Hole Diameter | 34 mm | 10 – 55 |
| Rim Fit Clearance | 0.5 mm | 0 – 3 |
| Lid Wall Thickness | 4 mm | 2 – 10 |
| Lid Top Thickness | 4 mm | 2 – 12 |
| Downward Rim Height | 15 mm | 5 – 60 |
| Cable Notch Width | 5 mm | 2 – 15 |
| Cable Notch Depth | 5 mm | 2 – 15 |
| Notch Centre Spacing | 40 mm | 10 – 100 |
| Outer Corner Fillet | 3 mm | 0 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no