Brackets and mounts
PV Module Aluminum Frame Housing
- Bounding box
- 2278.0 × 1134.0 × 35.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Act as a mechanical CAD assistant. Generate a simplified 3D CAD model for the aluminum frame housing of a photovoltaic module using these basic geometric steps: 1. **Create the Profile Sketch:** * On the XY plane, sketch a simple U-channel cross-section profile. * Dimensions: Overall width = 30 mm, overall height/depth = 35 mm, uniform wall thickness = 2 mm. * Include an internal glass-retention slot (width = 4.5 mm, depth = 10 mm) on the inner face. 2. **Extrude / Sweep along Path:** * Create a rectangular path centered at the origin with dimensions: Length = 2278 mm, Width = 1134 mm. * Sweep or extrude the U-channel profile completely around this rectangular perimeter path to form a closed rectangular frame. 3. **Corner Joints:** * Apply 45-degree miter cuts at all four corners where the frame segments meet. 4. **Basic Mounting Feature:** * Add a simple 9x14 mm slot centered on the bottom outer face of the long frame rails for fixture mounting.
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Length | 2278 mm | 500 – 5000 |
| Frame Width | 1134 mm | 300 – 3000 |
| Profile Width | 30 mm | 10 – 100 |
| Profile Depth | 35 mm | 10 – 100 |
| Wall Thickness | 2 mm | 0.5 – 10 |
| Glass Slot Width | 4.5 mm | 1 – 20 |
| Glass Slot Depth | 10 mm | 2 – 30 |
| Glass Slot Center Height | 17.5 mm | 2 – 90 |
| Mounting Slot Width | 9 mm | 2 – 30 |
| Mounting Slot Length | 14 mm | 2 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl