3D preview of PS5 Chassis Replacement Frame Assembly
Loading the interactive model…
Interactive 3D model of PS5 Chassis Replacement Frame Assembly

Brackets and mounts

PS5 Chassis Replacement Frame Assembly

3 views
Bounding box
210.5 × 430.0 × 179.5 mm
Engine
Precision B-rep
Parameters
38
Published
November 18, 2026

Download

Free to download and use. See the terms.

The prompt

"Generate a parametric PC chassis replacement assembly in millimeters with the following features: 1. Main Frame: Rectangular plate 210.5 mm wide × 430 mm tall × 5 mm thick with upper (150 mm × 220 mm) and lower (140 mm × 120 mm) rectangular airflow cutouts. 2. Chassis Hook Pockets: Six rectangular pockets on the rear face spaced 190.5 mm horizontally and 171.45 mm vertically to hook onto rear panel tabs, plus four 4.2 mm M4 pass-through holes. 3. PS5 Standoffs: Six cylinders of 9 mm outer diameter, 4.2 mm inner bore, and 20 mm height positioned at [INSERT 6 PCB SCREW COORDINATES]. 4. Disc Drive Cradle: Reinforced box-frame cradle along the upper-left edge with 171 mm × 53 mm × 192 mm interior cavity, 3.5 mm walls, and cooling slots to support a 600 g optical drive. 5. PSU Mount & Split Joint: Lower ventilated shelf for internal PSU, and a horizontal split at Y = 215 mm with a 12 mm overlapping step joint and two 3.2 mm alignment bolt holes."

Parameters

NameValueRange
Frame Width210.5 mm150 – 300
Frame Height430 mm250 – 600
Plate Thickness5 mm2 – 10
Split Height (Y)215 mm100 – 350
Step Joint Overlap12 mm6 – 30
Upper Airflow Cutout Width150 mm60 – 190
Upper Airflow Cutout Height190 mm60 – 200
Lower Airflow Cutout Width140 mm60 – 180
Lower Airflow Cutout Height120 mm50 – 160
Hook Pocket Width14 mm6 – 25
Hook Pocket Height10 mm5 – 20
Hook Pocket Depth2 mm1 – 4
Hook Pocket Horizontal Spacing190.5 mm100 – 200
Hook Pocket Vertical Spacing171.45 mm80 – 200
Lowest Hook Row (Y)25 mm10 – 60
M4 Pass-Through Hole Dia4.2 mm3 – 6
M4 Hole X Offset95 mm60 – 100
Step Joint Alignment Bolt Dia3.2 mm2 – 6
Alignment Bolt X Offset60 mm20 – 95
Standoff Outer Dia9 mm5 – 16
Standoff Bore Dia4.2 mm2 – 8
Standoff Height20 mm5 – 40
Standoff X Offset82 mm40 – 100
Standoff Row 1 (Y)30 mm10 – 80
Standoff Row 2 (Y)195 mm120 – 205
Standoff Row 3 (Y)425 mm380 – 428
Cradle Cavity X53 mm30 – 90
Cradle Cavity Y192 mm100 – 260
Cradle Cavity Depth171 mm100 – 250
Cradle Wall Thickness3.5 mm1.5 – 8
Cooling Slot Count50 – 12
Cooling Slot Width6 mm2 – 20
PSU Shelf Width180 mm100 – 210
PSU Shelf Depth100 mm50 – 180
PSU Shelf Thickness3 mm1.5 – 8
PSU Shelf Height (Y)40 mm5 – 120
Vent Slot Count60 – 12
Vent Slot Width8 mm2 – 20

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.