Enclosures and housings
PS Vita OLED Grip
- Bounding box
- 188.6 × 110.0 × 54.3 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a one-piece ergonomic 3D-printable grip for the Sony PlayStation Vita OLED (PCH-1000). Console dimensions: - Width: 182.0 mm - Height: 83.5 mm - Thickness: 18.6 mm Requirements: - Internal cavity: 182.6 × 84.1 × 19.2 mm (0.3 mm clearance on each side). - Slide-in design from the bottom. - Two ergonomic controller-style handles. - Handle width: 38 mm. - Handle thickness: 32 mm. - Handle length: 90 mm. - Wall thickness: 3 mm. - 4 mm fillets on all hand-contact surfaces. - 1 mm chamfer around the opening. - Keep the screen, buttons, analog sticks, D-pad, and touch screen fully exposed. - Add cut-outs for the charging port, headphone jack, speakers, shoulder buttons, game card slot, and power/volume buttons. - Suitable for FDM 3D printing without supports. - Output an editable CAD model and STL.
Parameters
| Name | Value | Range |
|---|---|---|
| Cavity Width | 182.6 mm | 150 – 250 |
| Cavity Height | 84.1 mm | 70 – 120 |
| Cavity Depth | 19.2 mm | 15 – 30 |
| Wall Thickness | 3 mm | 2 – 5 |
| Handle Width | 38 mm | 20 – 50 |
| Handle Thickness | 32 mm | 20 – 50 |
| Handle Length | 90 mm | 60 – 120 |
| Handle Bottom Offset | 20 mm | 5 – 40 |
| Handle Side Inset | 5 mm | 0 – 20 |
| Handle Angle | 15 deg | 0 – 30 |
| Handle Fillet Radius | 4 mm | 2 – 8 |
| Body Fillet Radius | 2 mm | 1 – 4 |
| Opening Chamfer | 1 mm | 0.5 – 3 |
| Rear Touch Width | 90 mm | 50 – 130 |
| Rear Touch Height | 35 mm | 20 – 60 |
| Rear Touch Y Center | 40 mm | 20 – 70 |
| Charging Port Width | 12 mm | 8 – 20 |
| Charging Port Height | 8 mm | 5 – 15 |
| Headphone Jack X | -25 mm | -40 – 0 |
| Left Speaker X | -45 mm | -60 – -20 |
| Right Speaker X | 45 mm | 20 – 60 |
| Shoulder Button Width | 22 mm | 15 – 30 |
| Game Card Slot X | 15 mm | 0 – 40 |
| Power/Volume X | -25 mm | -40 – 0 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox