Enclosures and housings
Protruding Beam End Cap
- Bounding box
- 150.0 × 181.0 × 210.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D printable protective cap for a horizontal wooden beam protruding from a house wall. Internal cavity: 142 mm wide, 192 mm high, 172 mm deep. Rectangular box with 4 mm thick walls. Five closed sides: front, top, bottom, left and right. Back fully open to slide onto the beam. The back edge must be completely flat and straight, without cutouts or grooves. Slope the outside roof downward toward the front by 10 mm. Add a 5 mm front drip edge. Add four 4.5 mm screw holes, two on each side. Use rounded outer corners. Material: ASA plastic. Generate a solid, watertight CAD model suitable for STL export.
Parameters
| Name | Value | Range |
|---|---|---|
| Internal cavity width | 142 mm | 80 – 300 |
| Internal cavity height | 192 mm | 80 – 300 |
| Internal cavity depth | 172 mm | 60 – 300 |
| Wall thickness | 4 mm | 2 – 10 |
| Roof drop from back to front | 10 mm | 0 – 30 |
| Overhang in front of the front face | 5 mm | 1 – 15 |
| Height of the drip edge on the front | 14 mm | 6 – 30 |
| Outer corner radius, front side | 6 mm | 2 – 20 |
| Rounding on the wall-side edges | 1.5 mm | 0.4 – 4 |
| Screw hole diameter | 4.5 mm | 2 – 8 |
| Hole distance from the wall face | 26 mm | 8 – 80 |
| Lower screw height above the floor | 45 mm | 10 – 95 |
| Upper screw height above the floor | 155 mm | 96 – 190 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,