24248
Loading the interactive model…
Interactive 3D model of Protective Screw Cover with 3 Snap Nubs

Enclosures and housings

Protective Screw Cover with 3 Snap Nubs

1 views
Bounding box
24 × 24 × 8 mm
Engine
3D Printing B-rep
Parameters
5
Published
November 15, 2026

Download

Free to download and use. See the terms.

The prompt

Create a hollow, open-bottom protective screw cover with a shallow rounded dome shape. Exact dimensions and geometry: * Outer bottom diameter: 24 mm. * Total height: 8 mm, including the straight vertical base section. * The first 2 mm from the bottom must be perfectly straight and vertical, forming a cylindrical skirt. * Above the 2 mm cylindrical section, the surface must transition smoothly into a rounded dome. * The dome must reach its highest point at exactly 8 mm total height. * The cover must be hollow inside and completely open at the bottom. * Wall thickness: approximately 0.8 mm, uniform throughout the cylindrical section and the dome. * Preserve a thin, continuous circular bottom rim. Internal locking features: * Add exactly 3 small rounded protrusions on the inside wall, near the bottom opening. * Position them evenly around the circumference, at 120-degree intervals. * Each protrusion must extend approximately 1 mm inward from the internal wall. * These protrusions are designed to snap onto and hold onto a circular ring (coroncina). Important design requirements: * Maintain smooth external surfaces. * Keep the inside hollow. * Do not add a bottom surface or close the opening. * Maintain consistent wall thickness. * Make the three internal locking protrusions integrated into the body. * The final model must be a watertight, manifold, 3D-printable solid. * Use millimeters as the unit of measurement. Generate a precise parametric CAD model and provide an STL export suitable for resin 3D printing.

Parameters

NameValueRange
Outer bottom diameter24 mm20 – 80
Total height8 mm5 – 15
Straight skirt height2 mm1 – 4
Wall thickness0.8 mm0.6 – 2
Snap protrusion depth1 mm0.5 – 2

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

3D preview of Cylindrical Stainless Steel Basket with Folding Handles368.0 × 250.0 × 252.1 mmPrecision

Cylindrical Stainless Steel Basket with Folding Handles

Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai

STEPSTLGLB15 PARAMS
3D preview of Immersion Cooling Enclosure592.0 × 402.0 × 166.0 mmPrecision

Immersion Cooling Enclosure

Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal

STEPSTLGLB15 PARAMS
31.8 × 7.8 × 11.3 mmPrecision

Lego 1x4 Technic Brick

Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8

STEPSTLGLB15 PARAMS
3D preview of Simple BWB with Propulsion Tube2130.0 × 6500.0 × 350.0 mmPrecision

Simple BWB with Propulsion Tube

Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a

STEPSTLGLB8 PARAMS
3D preview of Engranaje recto 50 dientes, módulo 2104.0 × 103.9 × 10.0 mmPrecision

Engranaje recto 50 dientes, módulo 2

Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá

STEPSTLGLB5 PARAMS
3D preview of G+1 Party Hall Structural Shell30000.0 × 60000.0 × 8950.0 mmPrecision

G+1 Party Hall Structural Shell

G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left

STEPSTLGLB19 PARAMS
Protective Screw Cover with 3 Snap Nubs - Free CAD Model (STEP, STL) | TextoCAD