Enclosures and housings
Profile with step and holes
- Bounding box
- 14.0 × 10.0 × 5.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- August 8, 2026
Download
Free to download and use. See the terms.
The prompt
To generate this specific 2D sketch in SolidWorks, you need to create a fully constrained part using the Front Plane, setting the origin at the bottom-left corner with a 14 mm base length and a 10 mm overall height. Construct the main rectangular profile, apply the **R3** fillet to the bottom-left corner and the **$\emptyset$4** arc at the top-left, and draw the 2.4 mm horizontal top offset connecting to the diagonal slope down to the right-hand step. Finally, cut the center circular hole with a **R1.6** radius and the internal 2 mm hexagonal hole, then extrude the combined profile to your required thickness.
Parameters
| Name | Value | Range |
|---|---|---|
| Base length | 14 mm | 10 – 50 |
| Overall height | 10 mm | 5 – 30 |
| Bottom‑left fillet radius | 3 mm | 0.5 – 10 |
| Top‑left arc diameter | 4 mm | 1 – 10 |
| Top horizontal offset | 2.4 mm | 0.5 – 10 |
| Step height | 2 mm | 0.5 – 8 |
| Step tread | 2 mm | 0.5 – 10 |
| Central hole radius | 1.6 mm | 0.5 – 5 |
| Hex hole across flats | 2 mm | 0.5 – 5 |
| Extrude thickness | 5 mm | 1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox