Enclosures and housings
Press Fixture Steel Part Set (SS400)
- Bounding box
- 4538.0 × 200.0 × 90.0 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- September 24, 2026
Download
Free to download and use. See the terms.
The prompt
Create a set of 5 mechanical steel parts (SS400 carbon steel) for a 20-ton hydraulic press fixture, arranged flat on the XY plane with 50mm gaps between each part. All dimensions are in millimeters (mm). 1. PART_B (Base Plate, Qty: 2): A flat rectangular plate, Thickness=22mm, Width=200mm, Length=350mm. At the exact geometric center, add a through-hole of Diameter=118mm. Around this central hole, add 4 smaller through-holes of Diameter=17.5mm (for M16 bolts) positioned on a pitch circle diameter (PCD) of 116mm, aligned symmetrically at 0, 90, 180, and 270 degrees. 2. PART_D (Main Channel Top, Qty: 1): A standard C-channel (structural groove steel) with dimensions 200mm (height) x 90mm (flange width) x 8mm (web thickness) x 13.5mm (flange thickness). Total length is 350mm. At the exact center of the 200mm flat back face (web), add a single through-hole of Diameter=118mm, completely concentric with PART_B. 3. PART_A (Doubling Side Plate, Qty: 2): A flat reinforcement plate, Thickness=19mm, Width=90mm, Total Length=500mm. The shape has stepped ends: both left and right ends are 50mm long with the full 90mm width, while the central 400mm section is recessed/notched symmetrically down to a width of 40mm. 4. PART_E (Base Channel, Qty: 2): A plain standard C-channel with dimensions 200mm x 90mm x 8mm x 13.5mm. Total length is 425mm. No holes, completely solid. 5. PART_C (Internal Stiffener Rib, Qty: 6): A solid flat rectangular plate for internal gusset reinforcement, Thickness=16mm, Height=173mm, Width=82mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Row Gap Between Parts | 50 mm | 5 – 200 |
| Plate Length (X) | 350 mm | 100 – 800 |
| Plate Width (Y) | 200 mm | 50 – 500 |
| Plate Thickness | 22 mm | 5 – 60 |
| Central Bore Dia | 118 mm | 20 – 300 |
| Bolt Hole Dia (M16) | 17.5 mm | 3 – 40 |
| Bolt Circle PCD | 116 mm | 20 – 340 |
| Bolt Hole Count | 4 pcs | 1 – 12 |
| Quantity | 2 pcs | 1 – 4 |
| Channel Length | 350 mm | 100 – 800 |
| Web Bore Dia | 118 mm | 20 – 300 |
| Quantity | 1 pcs | 1 – 3 |
| Section Height (h) | 200 mm | 60 – 400 |
| Flange Width (b) | 90 mm | 30 – 200 |
| Web Thickness (tw) | 8 mm | 2 – 40 |
| Flange Thickness (tf) | 13.5 mm | 2 – 40 |
| Channel Length | 425 mm | 100 – 800 |
| Quantity | 2 pcs | 1 – 4 |
| Total Length | 500 mm | 100 – 1000 |
| Full Width | 90 mm | 20 – 250 |
| Thickness | 19 mm | 4 – 60 |
| Full-Width End Length | 50 mm | 10 – 200 |
| Notched Centre Width | 40 mm | 10 – 200 |
| Quantity | 2 pcs | 1 – 4 |
| Rib Height | 173 mm | 30 – 400 |
| Rib Width | 82 mm | 20 – 300 |
| Rib Thickness | 16 mm | 3 – 60 |
| Quantity | 6 pcs | 1 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no