Enclosures and housings
Prep Pad Stacking Box
- Bounding box
- 70 × 70 × 76.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
3D-printable stacking box for 50.8 mm square packets. Units mm. One solid, no supports. Outer 62x62x76, open top. Cavity 54x54, 72 deep. Floor 4, walls 4. Corners: outer R8, inner R4. Skirt: 4 tall, straight vertical sides (no taper), 70x70 square, R8 corners. Front notch: 25.4 wide, centered, open top, down to 6 above floor, full-round U bottom. Notch edge rounding: fully round every edge of the notch where the notch walls meet the front outer face, the inner cavity face, and the top rim. Use R1.9 convex, true circular arcs, tangent-continuous with the flat faces (no visible start or end line), high resolution (96+ segments per full circle, no flat facets or stair-steps). Result should feel like a smooth bullnose edge. The notch walls and U bottom stay flat, no grooves or concave cuts. Rim fillets: 2.5 inner, 1.2 outer, convex, same smooth high-resolution arcs. Check: sizes exact, wall 4, notch edges R1.9 smooth convex, no facets, one solid.
Parameters
| Name | Value | Range |
|---|---|---|
| Cavity width | 54 mm | 20 – 100 |
| Cavity corner radius | 4 mm | 0 – 20 |
| Wall thickness | 4 mm | 1.2 – 10 |
| Floor thickness | 4 mm | 1.2 – 10 |
| Cavity depth | 72 mm | 10 – 200 |
| Top cavity fillet radius | 2.5 mm | 0 – 10 |
| Outer top fillet radius | 1.2 mm | 0 – 5 |
| Slot width | 25.4 mm | 10 – 50 |
| Slot start height above floor | 6 mm | 2 – 30 |
| Notch edge fillet radius | 1.9 mm | 0.5 – 5 |
| Base flange size | 70 mm | 40 – 150 |
| Base flange corner radius | 8 mm | 0 – 20 |
| Base flange thickness | 4 mm | 1.2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,