Enclosures and housings
Premium Classical Chess King
- Bounding box
- 52.0 × 52.0 × 100.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- October 6, 2026
Download
Free to download and use. See the terms.
The prompt
Create a single 3D printable chess King piece with a premium, elegant, classical aesthetic. Design requirements: - Overall shape: symmetrical rotationally symmetric chess piece, designed primarily by lathe/revolve geometry. - Style: elegant modern-classical King chess piece, refined and luxurious, with smooth flowing curves and balanced proportions. - Base: wide, heavy circular base with 3 stepped tiers, smoothly rounded edges and a polished appearance. - Lower body: gradually taper inward from the base using smooth concave and convex curves. - Middle body: slender central stem with an elegant bulbous collar and smooth transition curves. - Upper body: prominent rounded crown/head section with a slightly flared collar underneath. - Top: traditional King cross, centered perfectly on the vertical axis. Use a clean, simple cross with rounded edges. - Cross should be integrated into the crown and proportionally sized, not oversized. - Add subtle decorative rings around the collars and base, but avoid excessive ornamentation. - All edges should have realistic fillets/radii; no sharp unnecessary edges. - Maintain perfect radial symmetry for the entire body except the cross. - Make the piece look stable, premium, sophisticated, and suitable for a high-quality chess set. Proportions: - Overall height: 100 mm - Maximum base diameter: 52 mm - Base height: 15 mm - Body should gradually reduce to approximately 20–24 mm diameter at the narrowest section. - Crown diameter: approximately 30–34 mm. - Cross height: approximately 18 mm. - Use smooth transitions between all sections. CAD requirements: - Solid watertight/manifold model. - No intersecting or floating geometry. - Cross must be firmly connected to the crown. - Use clean continuous surfaces and fillets. - Designed for FDM/3D printing. - Keep the model centered on the global Z axis. - Output as one single solid chess King piece.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Height | 100 mm | 70 – 160 |
| Base Diameter | 52 mm | 35 – 75 |
| Base Height | 15 mm | 8 – 30 |
| Tier 2 Diameter | 44 mm | 20 – 70 |
| Tier 3 Diameter | 36 mm | 15 – 60 |
| Base Chamfer | 1 mm | 0 – 3 |
| Stem Diameter | 22 mm | 10 – 35 |
| Collar Diameter | 34 mm | 20 – 55 |
| Collar Height | 8 mm | 2 – 18 |
| Crown Diameter | 32 mm | 15 – 55 |
| Ring Height | 1.6 mm | 0.4 – 3 |
| Ring Depth | 1 mm | 0.2 – 2.5 |
| Fillet Radius | 1.2 mm | 0.1 – 2 |
| Cross Height | 18 mm | 10 – 30 |
| Cross Bar Thickness | 4.5 mm | 1 – 8 |
| Cross Arm Half-Length | 10 mm | 4 – 25 |
| Cross Arm Center Height | 12 mm | 4 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no