Enclosures and housings
Precision Sliding Enclosure (Lid + T-Rail Base)
- Bounding box
- 263.0 × 45.0 × 14.4 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- October 19, 2026
Download
Free to download and use. See the terms.
The prompt
MESHY 3D MODELING PROMPT: PRECISION SLIDING ENCLOSURE Create a highly realistic, mechanically accurate 3D model of a premium two-piece sliding enclosure using the supplied reference images. The objective is to produce two separate, physically compatible solid components that can slide together horizontally into a fully closed enclosure. The sliding mechanism must be geometrically functional, not merely decorative. 1. OVERALL INDUSTRIAL DESIGN Preserve the appearance of the reference product: - Slim, elongated rectangular enclosure with softly rounded corners. - Premium dark graphite / gunmetal metallic finish with subtle brushed-metal texture. - Smooth top surface featuring a recessed dark burgundy angular chevron logo. - Two elongated rounded rectangular openings near opposite ends. - One small circular detail near the logo. - Clean, sophisticated consumer-electronics aesthetic. - Minimal visible seams when completely assembled. Maintain consistent proportions, wall thicknesses, corner radii, and geometry between the two components. 2. UPPER COMPONENT: SLIDING LID The upper component is a rigid, mostly flat rectangular lid with downward-extending side walls. Both long interior sides of the lid contain continuous undercut channels shaped to capture mating T-shaped rails on the base. These channels must: - Run parallel to the full sliding direction. - Have an inward-facing retaining lip that hooks beneath the horizontal head of each T-rail. - Maintain a consistent profile, allowing the lid to move horizontally while preventing it from lifting vertically. - Remain open at the sliding entry end. - Terminate at the opposite end, which is closed..
Parameters
| Name | Value | Range |
|---|---|---|
| Lid Length | 120 mm | 60 – 240 |
| Lid Width | 45 mm | 25 – 90 |
| Lid Height | 8 mm | 7 – 20 |
| Lid Corner Radius | 4 mm | 0.5 – 10 |
| Channel Closed End Wall | 5 mm | 2 – 15 |
| Base Length | 118 mm | 60 – 240 |
| Base Width | 43 mm | 25 – 90 |
| Base Height | 10 mm | 5 – 30 |
| Base Corner Radius | 3.5 mm | 0.5 – 10 |
| T-Rail Head Width | 3.5 mm | 1 – 8 |
| T-Rail Head Height | 2.6 mm | 1 – 6 |
| T-Rail Stem Width | 0.9 mm | 0.4 – 3 |
| T-Rail Neck Height | 1.8 mm | 0.8 – 4 |
| T-Rail Length | 100 mm | 40 – 200 |
| T-Rail Centre Offset | 18.75 mm | 10 – 20 |
| Sliding Clearance | 0.3 mm | 0.05 – 1 |
| Window Slot Length | 30 mm | 5 – 60 |
| Window Slot Width | 8 mm | 2 – 20 |
| Window X Offset | 35 mm | 0 – 50 |
| Chevron Logo Scale | 1 ratio | 0.4 – 2 |
| Chevron Recess Depth | 0.8 mm | 0.2 – 2 |
| Circular Detail Diameter | 6 mm | 1 – 15 |
| Circular Detail Depth | 1 mm | 0.2 – 2.5 |
| Circular Detail X Offset | 17 mm | 0 – 50 |
| Exploded Layout Gap | 25 mm | 5 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no