Jigs and fixtures
Precision Base Tray
- Bounding box
- 300.0 × 220.0 × 11.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- August 8, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precision aluminium rectangular base tray. Exterior dimensions: 300mm wide, 220mm deep, 11mm tall. Wall thickness: 2.5mm on all four sides and base floor. Corner radius: 10mm on all four vertical corners. Interior floor is flat and smooth. Around the full interior perimeter where the floor meets the walls, add a 0.4mm × 45 degree chamfer. On the front long edge (300mm side), centered, machine a finger notch 30mm wide × 4mm deep with a 2mm radius at the bottom. In the top right corner of the interior rim add a small relief notch 15mm wide × 8mm deep × 4mm radius.
Parameters
| Name | Value | Range |
|---|---|---|
| Exterior width | 300 mm | 50 – 500 |
| Exterior depth | 220 mm | 50 – 500 |
| Total height | 11 mm | 5 – 50 |
| Wall thickness | 2.5 mm | 1 – 5 |
| Exterior corner radius | 10 mm | 0 – 150 |
| Interior floor-wall chamfer | 0.4 mm | 0 – 1 |
| Finger notch width | 30 mm | 10 – 280 |
| Finger notch depth | 4 mm | 1 – 11 |
| Finger notch bottom fillet | 2 mm | 0 – 4 |
| Relief notch width | 15 mm | 5 – 147 |
| Relief notch depth | 8 mm | 1 – 20 |
| Relief notch bottom fillet | 4 mm | 0 – 7.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl