3D preview of Power Module Bond Ribbons (2x)
Loading the interactive model…
Interactive 3D model of Power Module Bond Ribbons (2x)

Enclosures and housings

Power Module Bond Ribbons (2x)

1 views
Bounding box
6.8 × 6.0 × 1.9 mm
Engine
Precision B-rep
Parameters
6
Published
November 18, 2026

Download

Free to download and use. See the terms.

The prompt

Create two realistic curved bond ribbons for a power semiconductor module. IMPORTANT: Generate ONLY the two bond ribbons. Do not create a heat sink, semiconductor die or other module components. ### 1. Ribbon geometry Create two separate 3D solid bond ribbons with the following specifications: - Number of ribbons: 2 - Ribbon width: 2 mm - Initial ribbon thickness: 0.1 mm - Approximate ribbon centreline loop length: 8 mm - Shape: Smooth elevated curved loop. - Cross-section: Flat rectangular strip, not circular wire. - Both ribbons must have identical geometry. - Keep the ribbons parallel to each other. ### 2. Ribbon shape Each ribbon must have: - A flat starting bond foot. - A smooth upward-curving section. - An elevated central loop. - A smooth downward-curving section. - A flat ending bond foot. The ribbon should resemble an actual power semiconductor bonding ribbon, with smooth transitions and no sharp corners. ### 3. CAD modelling method Use a Sweep operation: 1. Create a curved 3D centreline path. 2. Create a rectangular cross-section measuring 2 mm wide and 0.1 mm thick. 3. Sweep the rectangular cross-section along the curved path. 4. Generate a continuous solid ribbon. 5. Repeat for the second ribbon. 6. Maintain equal spacing between both ribbons. ### 4. Positioning Design the ribbons to connect: - Starting end: Top surface of the silicon semiconductor die. - Ending end: Adjacent upper copper substrate layer. The ribbons must have two clearly identifiable bond feet. Keep endpoint positions and loop height as editable parameters because their exact dimensions have not yet been established. Use the existing module geometry as a positioning reference if available. Otherwise, create the ribbons as separate components with clearly defined endpoint reference coordinates. ### 5. Parametric requirements Make these parameters editable: - Ribbon width = 2 mm. - Ribbon thickness = 0.1 mm. - Loop length = approximately 8 mm. - Loop height = adjustable. - Distance between two ribbons = adjustable. The geometry must allow thickness changes to: - 0.1 mm - 0.2 mm - 0.3 mm ### 6. Output Create two separate, valid solid CAD bodies. Name them: - Bond_Ribbon_1 - Bond_Ribbon_2 Provide: - Isometric view. - Front view. - Top view. - Side view. - Close-up view of both bond feet. Export as STEP format for ANSYS Workbench R2023. Prioritise realistic bonding ribbon geometry, accurate dimensions, smooth curvature and editable solid geometry.

Parameters

NameValueRange
Ribbon width2 mm1 – 6
Ribbon thickness0.1 mm0.05 – 0.5
Loop length (developed centreline)8 mm3 – 20
Loop height1.75 mm0.2 – 5
Bond foot length0.8 mm0.2 – 1.5
Ribbon centre-to-centre pitch4 mm1.2 – 15

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

3D preview of Cylindrical Stainless Steel Basket with Folding Handles368.0 × 250.0 × 252.1 mmPrecision

Cylindrical Stainless Steel Basket with Folding Handles

Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai

STEPSTLGLB15 PARAMS
3D preview of Lego 1x4 Technic Brick31.8 × 7.8 × 11.3 mmPrecision

Lego 1x4 Technic Brick

Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8

STEPSTLGLB15 PARAMS
3D preview of Immersion Cooling Enclosure592.0 × 402.0 × 166.0 mmPrecision

Immersion Cooling Enclosure

Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal

STEPSTLGLB15 PARAMS
3D preview of Simple BWB with Propulsion Tube2130.0 × 6500.0 × 350.0 mmPrecision

Simple BWB with Propulsion Tube

Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a

STEPSTLGLB8 PARAMS
3D preview of Engranaje recto 50 dientes, módulo 2104.0 × 103.9 × 10.0 mmPrecision

Engranaje recto 50 dientes, módulo 2

Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá

STEPSTLGLB5 PARAMS
3D preview of G+1 Party Hall Structural Shell30000.0 × 60000.0 × 8950.0 mmPrecision

G+1 Party Hall Structural Shell

G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left

STEPSTLGLB19 PARAMS
Power Module Bond Ribbons (2x) - Free CAD Model (STEP, STL) | TextoCAD