Brackets and mounts
Portable Cyberdeck Enclosure - Exploded Parts
- Bounding box
- 1975 × 140 × 45 mm
- Engine
- 3D Printing B-rep
- Parameters
- 63
- Published
- November 21, 2026
Download
Free to download and use. See the terms.
The prompt
Design a compact, industrial-style portable cyberdeck enclosure for a Raspberry Pi 4 (4GB). The device has two sections: Upper compartment: Houses the Raspberry Pi, cooling fan, wiring and power switch. A 60% USB keyboard is mounted on the top panel, occupying approximately 75–85% of its area. The fan intake and power switch sit beside the keyboard. The Pi's ports face right. The top panel must be removable with screws. Lower compartment: A separate, removable battery compartment underneath the main enclosure. It houses a USB-C power bank with extra room for cables. Its walls slope outward by 2–4 mm from the flat bottom towards the top, creating a sleek tapered shape. It attaches to the main enclosure using screws from underneath. Use reinforced screw mounts, realistic internal clearances and cable routing. Make the design practical for 3D printing. Generate an assembled model and an exploded view showing both compartments.
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded layout gap | 30 mm | 10 – 80 |
| Upper shell width | 320 mm | 200 – 400 |
| Upper shell depth | 140 mm | 100 – 250 |
| Upper shell height | 45 mm | 25 – 100 |
| Shell wall thickness | 4 mm | 2 – 8 |
| Shell floor thickness | 4 mm | 2 – 8 |
| M3 boss outer diameter | 8 mm | 5 – 12 |
| M3 boss height | 38 mm | 10 – 80 |
| Boss inset from shell edge | 14 mm | 8 – 30 |
| M3 clearance hole | 3.4 mm | 3 – 4 |
| Pi standoff height | 5 mm | 3 – 10 |
| Pi port opening width | 16 mm | 8 – 25 |
| Pi port opening height | 13 mm | 5 – 20 |
| Internal cable channel width | 8 mm | 5 – 12 |
| Internal cable channel depth | 3 mm | 1 – 6 |
| Switch cutout width | 19.5 mm | 12 – 30 |
| Switch cutout depth | 13.5 mm | 8 – 25 |
| Top panel thickness | 4 mm | 2 – 8 |
| Keyboard recess depth | 2 mm | 1 – 5 |
| Keyboard width | 285 mm | 200 – 320 |
| Keyboard depth | 115 mm | 80 – 140 |
| Keyboard height | 25 mm | 10 – 40 |
| Keyboard clearance | 2 mm | 0.5 – 5 |
| Key pitch | 16 mm | 10 – 22 |
| Keycap size | 14 mm | 8 – 20 |
| Keycap height | 5 mm | 2 – 10 |
| Fan vent size | 40 mm | 20 – 60 |
| Bottom width | 300 mm | 200 – 380 |
| Bottom depth | 120 mm | 80 – 200 |
| Top width | 306 mm | 200 – 390 |
| Top depth | 126 mm | 80 – 210 |
| Tray height | 35 mm | 20 – 80 |
| Tray wall thickness | 4 mm | 2 – 8 |
| Underside screw inset | 16 mm | 8 – 30 |
| Internal boss height | 8 mm | 4 – 15 |
| Cable pass-through diameter | 8 mm | 5 – 16 |
| Pi board width | 85 mm | 60 – 100 |
| Pi board depth | 56 mm | 40 – 80 |
| Pi PCB thickness | 2 mm | 1 – 4 |
| Pi port block length | 20 mm | 10 – 30 |
| Pi port block height | 14 mm | 6 – 20 |
| Fan size | 40 mm | 20 – 60 |
| Fan thickness | 10 mm | 5 – 20 |
| Fan hub diameter | 10 mm | 5 – 20 |
| Switch body width | 19 mm | 10 – 30 |
| Switch body depth | 13 mm | 8 – 25 |
| Switch body height | 15 mm | 8 – 30 |
| Switch lead length | 15 mm | 5 – 40 |
| Power bank width | 160 mm | 100 – 220 |
| Power bank depth | 75 mm | 40 – 120 |
| Power bank height | 22 mm | 10 – 40 |
| USB-C port width | 9 mm | 5 – 15 |
| USB-C port height | 3.5 mm | 2 – 8 |
| Screw shaft diameter | 3 mm | 2 – 4 |
| Screw head diameter | 5.5 mm | 4 – 8 |
| Screw head height | 2 mm | 1 – 4 |
| M3x10 length | 10 mm | 5 – 20 |
| M3x12 length | 12 mm | 5 – 25 |
| Gap between screws | 4 mm | 1 – 10 |
| Cable diameter | 4 mm | 2 – 8 |
| Cable length | 120 mm | 60 – 180 |
| Number of cable leads | 4 mm | 1 – 8 |
| Cable spacing | 8 mm | 4 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
