Enclosures and housings
Portable Computer Enclosure Assembly
- Bounding box
- 113.0 × 47.0 × 79.5 mm
- Engine
- Precision B-rep
- Parameters
- 53
- Published
- October 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create a custom 3D-printable portable computer enclosure inspired by a rounded, glossy-black pocket-sized hand-mist case. Make the front opening for a 1.3-inch square LCD screen in the upper two-fifths, with small physical button openings in the lower three-fifths. Include a compartment for a Raspberry Pi Zero 2 W, a rechargeable battery, charging circuitry, a side charging-port opening, a 3.5 mm headphone-jack opening, and a removable rear cover. Use millimeter dimensions, rounded corners, printable wall thicknesses, and enough internal clearance for connectors and wires. Keep the screen, buttons, and rear cover as separate printable parts where appropriate. Do not guess component dimensions; leave those areas adjustable until measurements are supplied.
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure Width | 110 mm | 80 – 160 |
| Enclosure Height | 75 mm | 50 – 120 |
| Enclosure Depth | 22 mm | 14 – 40 |
| Wall Thickness | 2 mm | 1.2 – 4 |
| Corner Radius | 4 mm | 2 – 6 |
| Internal Boss Diameter | 5 mm | 3 – 8 |
| LCD Opening Size | 28 mm | 20 – 40 |
| LCD Center Height | 22.5 mm | 10 – 40 |
| Button Opening Diameter | 6 mm | 3 – 12 |
| Button Spacing X | 18 mm | 8 – 40 |
| Button Spacing Z | 16 mm | 8 – 40 |
| Button Cluster Center Height | -15 mm | -35 – 10 |
| Charge Port Opening Width (Z) | 8 mm | 3 – 20 |
| Charge Port Opening Height (Y) | 3 mm | 1.5 – 8 |
| Headphone Jack Opening Diameter | 6 mm | 3 – 12 |
| Charge Port Y Position | 11 mm | 5 – 18 |
| Charge Port Z Position | 18 mm | -20 – 35 |
| Headphone Jack Y Position | 11 mm | 5 – 18 |
| Headphone Jack Z Position | -15 mm | -35 – 15 |
| Rear Cover Thickness | 3 mm | 1.5 – 6 |
| Rear Cover Screw Hole Diameter | 2.2 mm | 1.5 – 5 |
| Rear Cover Screw X Distance | 50 mm | 30 – 70 |
| Rear Cover Screw Z Distance | 32 mm | 20 – 50 |
| LCD Placeholder Envelope Size | 24 mm | 15 – 40 |
| LCD Placeholder Thickness | 3 mm | 1 – 8 |
| LCD Clearance Gap | 1 mm | 0.5 – 4 |
| Screen Bezel Outer Size | 34 mm | 20 – 50 |
| Screen Bezel Thickness | 2 mm | 1 – 5 |
| Screen Bezel Inner Opening | 26 mm | 15 – 45 |
| Button Cap Height (Outside) | 5 mm | 2 – 12 |
| Button Stem Length (Inside) | 4 mm | 2 – 12 |
| Pi Zero Tray Length (X) | 70 mm | 50 – 100 |
| Pi Zero Tray Width (Z) | 35 mm | 25 – 60 |
| Pi Zero Tray Overall Height (Y) | 8 mm | 4 – 16 |
| Pi Zero Tray Base Thickness | 2 mm | 1 – 4 |
| Pi Zero Tray Standoff Diameter | 5 mm | 3 – 8 |
| Pi Zero Tray Rear Clearance | 1.5 mm | 0.5 – 5 |
| Battery Cradle Length (X) | 65 mm | 40 – 100 |
| Battery Cradle Width (Z) | 40 mm | 25 – 70 |
| Battery Cradle Height (Y) | 12 mm | 6 – 25 |
| Battery Cradle Wall Thickness | 2 mm | 1.2 – 4 |
| Battery Cradle Wire Slot Width | 6 mm | 3 – 12 |
| Battery Cradle Z Center | -20 mm | -35 – 15 |
| Charging Tray Length (X) | 35 mm | 20 – 60 |
| Charging Tray Width (Z) | 25 mm | 15 – 50 |
| Charging Tray Height (Y) | 6 mm | 4 – 14 |
| Charging Tray Wall Thickness | 2 mm | 1.2 – 4 |
| Charging Tray Wire Slot Width | 5 mm | 3 – 10 |
| Charging Tray X Center | 30 mm | 10 – 50 |
| Charging Tray Z Center | 12 mm | -30 – 30 |
| Side Port Insert Length (Z) | 20 mm | 10 – 40 |
| Side Port Insert Width (Y) | 12 mm | 6 – 22 |
| Side Port Insert Thickness (X) | 3 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no