Jigs and fixtures
Pool Tap with Waterfall Spout and Hose Connector
- Bounding box
- 88.0 × 84.0 × 136.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- August 11, 2026
Download
Free to download and use. See the terms.
The prompt
need pool tap, stad 50mmx50mm holes in corners for bolts, filler connect to garden hose with quick garden connector, filers dimensions 100mm high, front snap should be flat that water imitates waterfall, front snap should be in 50mm of the stands end
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Width | 80 mm | 70 – 120 |
| Plate Height | 80 mm | 70 – 120 |
| Plate Thickness | 6 mm | 4 – 10 |
| Bolt Hole Diameter | 5.5 mm | 4 – 8 |
| Bolt Hole Spacing | 50 mm | 40 – 80 |
| Fixture Height | 100 mm | 60 – 150 |
| Body Depth (from wall) | 50 mm | 30 – 80 |
| Wall Thickness | 4 mm | 2 – 6 |
| Waterfall Slot Width | 40 mm | 20 – 70 |
| Waterfall Slot Height | 5 mm | 2 – 10 |
| Connector Height | 30 mm | 15 – 50 |
| Connector OD | 25 mm | 20 – 35 |
| Connector Bore | 15 mm | 10 – 25 |
| Groove Root Diameter | 21 mm | 18 – 30 |
| Groove Width | 4 mm | 2 – 6 |
| Groove Distance from Base | 10 mm | 5 – 20 |
| Edge Fillet Radius | 1 mm | 0.5 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl