Enclosures and housings
Pocket DAC Enclosure
- Bounding box
- 72.0 × 115.0 × 24.0 mm
- Engine
- Precision B-rep
- Parameters
- 42
- Published
- October 6, 2026
Download
Free to download and use. See the terms.
The prompt
Pocket DAC enclosure. Rectangular box 72x115x24mm. Wall thickness 2.5mm. Internal cross-baffle wall at Y=75mm dividing into battery pocket A and circuit board pocket B. Pocket B floor includes four M2.5 threaded standoff bosses matching 18mm circular PCB center patterns. Front panel cuts: circular volume shaft cutout at (52,12) radius 4mm with concentric counterbore radius 11mm depth 3mm; toggle cutout at (14,7) radius 3.175mm; rectangular window from X=6 to X=34 and Y=13 to Y=21 with 0.5mm perimeter chamfer. Rear panel cuts: two rectangular slots 9.4x3.7mm centered at X=16 and X=32; circular cutout radius 5.1mm centered at (54,12). Floor includes two parallel linear routing channels 3mm wide and 3mm deep running from Y=10 to Y=70 at X=20 and X=45. Matte-charcoal finish.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Width (X) | 72 mm | 50 – 150 |
| Overall Depth (Y) | 115 mm | 80 – 200 |
| Overall Height (Z) | 24 mm | 15 – 60 |
| Side Wall Thickness | 2.5 mm | 1 – 6 |
| Rear Wall Thickness | 2.5 mm | 1 – 6 |
| Front Wall Thickness | 3.5 mm | 2.5 – 8 |
| Floor Thickness | 4 mm | 2 – 8 |
| Baffle Y Position | 75 mm | 30 – 100 |
| Baffle Thickness | 2.5 mm | 1 – 6 |
| PCB Center X | 36 mm | 20 – 60 |
| PCB Center Y | 95 mm | 80 – 110 |
| PCB Pattern Radius | 9 mm | 4 – 15 |
| Standoff Outer Diameter | 4 mm | 3 – 8 |
| Standoff Hole Diameter | 2.1 mm | 1.5 – 3 |
| Standoff Height | 4 mm | 2 – 10 |
| Volume Shaft X | 52 mm | 20 – 70 |
| Volume Shaft Z | 12 mm | 4 – 20 |
| Volume Shaft Radius | 4 mm | 2 – 8 |
| Counterbore Radius | 11 mm | 6 – 20 |
| Counterbore Depth | 3 mm | 0.5 – 6 |
| Toggle X | 14 mm | 2 – 40 |
| Toggle Z | 7 mm | 2 – 20 |
| Toggle Radius | 3.18 mm | 1 – 8 |
| Window X1 | 6 mm | 0 – 70 |
| Window X2 | 34 mm | 10 – 72 |
| Window Z1 | 13 mm | 0 – 23 |
| Window Z2 | 21 mm | 5 – 24 |
| Window Chamfer | 0.5 mm | 0.1 – 1.5 |
| Rear Slot 1 Center X | 16 mm | 2 – 70 |
| Rear Slot 2 Center X | 32 mm | 2 – 70 |
| Rear Slot Center Z | 12 mm | 4 – 20 |
| Rear Slot Length X | 9.4 mm | 4 – 20 |
| Rear Slot Length Z | 3.7 mm | 1 – 10 |
| Rear Circle Center X | 54 mm | 10 – 70 |
| Rear Circle Center Z | 12 mm | 4 – 20 |
| Rear Circle Radius | 5.1 mm | 2 – 15 |
| Channel 1 X | 20 mm | 2 – 70 |
| Channel 2 X | 45 mm | 2 – 70 |
| Channel Start Y | 10 mm | 0 – 110 |
| Channel End Y | 70 mm | 20 – 115 |
| Channel Width | 3 mm | 1 – 8 |
| Channel Depth | 3 mm | 0.5 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no