Enclosures and housings
Plywood Mold Box
- Bounding box
- 12.0 × 10.0 × 8.8 mm
- Engine
- Precision B-rep
- Parameters
- 4
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a simple CAD assembly for a plywood mold box. Requirements: Units: Inches Material thickness: 0.75 inch plywood Construction: Open-top plywood box The model must contain exactly five separate solid bodies: • Bottom Panel • Front Panel • Back Panel • Left Side Panel • Right Side Panel Requirements: - Every panel is an independent solid body. - All joints are simple square 90-degree joints. - No rabbets. - No dados. - No grooves. - No tongues. - No chamfers. - No fillets. - No textures. - No hardware. - No bolt holes. - No screw holes. - No PVC holes. - No mold inserts. - No draft angles. - No cutouts. Panels should assemble into a clean, open-top plywood box. This is a structural reference model only. Maintain clean watertight geometry suitable for later engineering revisions. Name each body: Bottom Front Back Left Right Prioritize simple, accurate geometry over visual detail.
Parameters
| Name | Value | Range |
|---|---|---|
| Box Length | 12 in | 1 – 48 |
| Box Width | 10 in | 1 – 48 |
| Box Height | 8 in | 1 – 48 |
| Material Thickness | 0.75 in | 0.125 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox