Brackets and mounts
PLACA PORTAMOTOR
- Bounding box
- 340.0 × 240.0 × 25.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Create a steel motor mounting plate 340 mm (X) x 240 mm (Y) x 25 mm thick (Z). X along motor shaft, Y lateral. Origin at center of bottom face. All edges chamfered 1 mm. 1. Motor bolt pattern: 4 threaded holes M12x1.75 through, rectangular pattern 230 mm (X) x 155 mm (Y), centered. 2. On 2 diagonal motor holes (X=-115,Y=-77.5 and X=+115,Y=+77.5) add a counterbore from the top face, diameter 14 mm (H7), 8 mm deep, coaxial (locating bushings). 3. Leveling screws: 4 threaded holes M16x1.5 through at X = +/-150 mm, Y = +/-100 mm. 4. Hold-down slots: 4 through slots, width 13.5 mm, length 33.5 mm, slot length oriented along Y, centered at X = +/-50 mm, Y = +/-95 mm. 5. Name the part "PLACA PORTAMOTOR". Export as STEP.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length X | 340 mm | 200 – 600 |
| Plate Width Y | 240 mm | 150 – 500 |
| Plate Thickness Z | 25 mm | 10 – 60 |
| Edge Chamfer | 1 mm | 0.2 – 3 |
| Motor Hole Tap Dia (M12x1.75) | 10.2 mm | 6 – 16 |
| Motor Pattern X | 230 mm | 100 – 400 |
| Motor Pattern Y | 155 mm | 80 – 300 |
| Counterbore Dia (H7) | 14 mm | 12 – 24 |
| Counterbore Depth | 8 mm | 2 – 20 |
| Levelling Hole Tap Dia (M16x1.5) | 14.5 mm | 8 – 22 |
| Levelling Hole X | 150 mm | 60 – 165 |
| Levelling Hole Y | 100 mm | 40 – 115 |
| Slot Width | 13.5 mm | 6 – 30 |
| Slot Length (along Y) | 33.5 mm | 15 – 80 |
| Slot Centre X | 50 mm | 10 – 150 |
| Slot Centre Y | 95 mm | 20 – 110 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl