Enclosures and housings
Pitching Rubber Anchor Block
- Bounding box
- 609.6 × 152.4 × 38.1 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D model of a pitching rubber anchor block for a retractable setup tool. Geometry: - Rectangular block measuring 24 inches wide, 6 inches deep, and 1.5 inches high. - Top edges have a 0.25-inch fillet (rounded bevel) for smooth cleat interaction. Feature 1 (D-Ring Anchor Recess): - A centered rectangular pocket on the front vertical face (facing home plate) measuring 2 inches wide, 1 inch deep, and 0.5 inches high, allowing a metal D-ring to sit recessed into the front face. - Two horizontal 0.25-inch bolt through-holes extending from the back of the D-ring pocket through to the rear face of the block. Feature 2 (Anchoring Spike Holes): - Two vertical cylindrical through-holes, each 0.52 inches in diameter, placed 3 inches inward from the far left and right edges. Design Intent: - Watertight solid body designed for 3D printing in heavy-duty ABS or PETG.
Parameters
| Name | Value | Range |
|---|---|---|
| Block Width | 609.6 mm | 100 – 2000 |
| Block Depth | 152.4 mm | 50 – 500 |
| Block Height | 38.1 mm | 10 – 200 |
| Top Fillet Radius | 6.35 mm | 0 – 20 |
| D-Ring Pocket Width | 50.8 mm | 10 – 200 |
| D-Ring Pocket Depth | 25.4 mm | 1 – 100 |
| D-Ring Pocket Height | 12.7 mm | 1 – 100 |
| Bolt Hole Diameter | 6.35 mm | 1 – 20 |
| Bolt Hole Spacing | 38.1 mm | 5 – 180 |
| Spike Hole Diameter | 13.21 mm | 1 – 30 |
| Spike Hole Inset | 76.2 mm | 0 – 300 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox