Enclosures and housings
Pi Pico W Case with Battery and Screen Frame
- Bounding box
- 97.5 × 57.5 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- August 19, 2026
Download
Free to download and use. See the terms.
The prompt
i want to make a case for a raspberry pi pico w with a led screen attached and a 1200 mah battery. The battery is 60mm x 35mm x 5mm, and is the bottom half of the case, create a 2.5mm shell around the battery shape, and then on the long walls of the shell, add a raised lip to hold the pico pi, it has a body of 51mm x 20.4mm. the top of the pi has a LED board that is 62mm x 24.5mm. that means the big shell should be the size of the battery, then inside there should be lip on the long walls of 4mm into the center with an offset of 6 mm upward from the floor of the inside of the shell. and on the top layer, the top should be the same size as teh battery but the long side should have aproxximately a 5 mm bumper on both sides (so the screen's long sides are buffered into the case)
Parameters
| Name | Value | Range |
|---|---|---|
| Battery length | 60 mm | 40 – 120 |
| Battery width | 35 mm | 20 – 80 |
| Battery thickness | 5 mm | 2 – 20 |
| Shell wall thickness | 2.5 mm | 0.5 – 5 |
| Pico support lip depth | 4 mm | 1 – 8 |
| Pico lip height above internal floor | 6 mm | 1 – 20 |
| Clearance above Pico lip | 1.5 mm | 0.1 – 10 |
| Top frame height | 5 mm | 1 – 15 |
| Screen opening length | 62 mm | 30 – 100 |
| Screen opening width | 24.5 mm | 10 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox