3D preview of phone_slide_sleeve
Loading the interactive model…
Interactive 3D model of phone_slide_sleeve

Enclosures and housings

phone_slide_sleeve

2 views
Bounding box
156 × 76 × 43.5 mm
Engine
3D Printing B-rep
Parameters
7
Published
November 16, 2026

Download

Free to download and use. See the terms.

The prompt

3D Model Specification: Angled Sleeve / Dock HousingOverall Form & Silhouette: A rectangular, hollowed-out sleeve or enclosure designed to sit flat on a desk, shown here in a light matte grey finish against a dark background. The front face is angled slightly backward from the bottom to the top, giving the side profile a subtle parallelogram or trapezoidal slant. Edges & Corners: All exterior corners and perimeter edges are smoothly rounded (filleted) for a clean, modern industrial design. The interior edges of the main opening also feature slight rounded bevels. Main Front Opening: The front is completely open, leading into a wide, low-profile rectangular cavity that extends deep into the housing. The side walls and top ceiling have a uniform, sturdy wall thickness surrounding this opening. Bottom Cutout (U-Notch): Centered along the front edge of the bottom floor is a deep, rectangular U-shaped cutout with rounded inner corners. This cutout creates an open channel at the base (ideal for finger/thumb access to slide a device out or for cable clearance). Internal Base Details: Looking inside the floor of the cavity, the inner edge of the U-notch steps slightly downward or features a recessed lip. Directly at the center of the back edge of that U-notch, there is a tiny, semi-circular notch or alignment pinhole. Exterior Side Detail: Along the outer right-hand vertical wall, running horizontally from near the front toward the back, is a thin, recessed pill-shaped slot or groove. Back & Top Surfaces: The top surface is completely flat, smooth, and uninterrupted. The rear wall is closed off, forming a pocket rather than a pass-through tunnel.

Parameters

NameValueRange
Phone length150 mm120 – 200
Phone width70 mm60 – 100
Phone thickness8 mm5 – 15
Wall thickness3 mm2 – 6
Base height12 mm8 – 20
Cover thickness4 mm2 – 10
Front face angle10 deg0 – 30

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

3D preview of Cylindrical Stainless Steel Basket with Folding Handles368.0 × 250.0 × 252.1 mmPrecision

Cylindrical Stainless Steel Basket with Folding Handles

Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai

STEPSTLGLB15 PARAMS
3D preview of Immersion Cooling Enclosure592.0 × 402.0 × 166.0 mmPrecision

Immersion Cooling Enclosure

Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal

STEPSTLGLB15 PARAMS
31.8 × 7.8 × 11.3 mmPrecision

Lego 1x4 Technic Brick

Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8

STEPSTLGLB15 PARAMS
3D preview of Simple BWB with Propulsion Tube2130.0 × 6500.0 × 350.0 mmPrecision

Simple BWB with Propulsion Tube

Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a

STEPSTLGLB8 PARAMS
3D preview of Engranaje recto 50 dientes, módulo 2104.0 × 103.9 × 10.0 mmPrecision

Engranaje recto 50 dientes, módulo 2

Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá

STEPSTLGLB5 PARAMS
3D preview of G+1 Party Hall Structural Shell30000.0 × 60000.0 × 8950.0 mmPrecision

G+1 Party Hall Structural Shell

G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left

STEPSTLGLB19 PARAMS
phone_slide_sleeve - Free CAD Model (STEP, STL) | TextoCAD