Enclosures and housings
Phone Power Button Replacement (1 mm)
- Bounding box
- 2.5 × 2.0 × 4.9 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- September 20, 2026
Download
Free to download and use. See the terms.
The prompt
Design a parametric 3D CAD STEP file of a smartphone power button replacement part with the following exact custom measurements: Geometric Specifications: - Main Button Body (Upper Press Face): A small rectangular block measuring exactly 1.0 mm in length, 1.0 mm in width, and 0.9 mm in thickness. - Side Retaining Legs: Two miniature cylindrical legs positioned on each lateral end of the main body's bottom face. Each cylinder has a diameter of exactly 0.8 mm and a length (protrusion) of 3.0 mm. - Central Actuator Leg: A small rectangular post located exactly in the center of the bottom face. It measures 2.0 mm in width, has a thickness matching the side legs (0.8 mm), and a length (protrusion) of 4.0 mm. - Spatial Clearance and Spacing: Ensure a precise gap of exactly 1.0 mm between the outer edge of the main body and the side cylindrical legs. Additionally, maintain a clear gap of exactly 1.0 mm between each side leg and the central rectangular actuator leg. Manufacturing Constraints: - Solid watertight mesh geometry suitable for high-resolution 3D printing or STEP conversion. Avoid steep unsupportable overhangs between the tiny features.
Parameters
| Name | Value | Range |
|---|---|---|
| Press Face Length (X) | 1 mm | 0.6 – 3 |
| Press Face Width (Y) | 1 mm | 0.6 – 3 |
| Press Face Thickness (Z) | 0.9 mm | 0.4 – 2 |
| Side Leg Diameter | 0.8 mm | 0.4 – 1.6 |
| Side Leg Protrusion | 3 mm | 0.5 – 8 |
| Actuator Width (Y) | 2 mm | 0.6 – 4 |
| Actuator Thickness (X) | 0.8 mm | 0.4 – 2 |
| Actuator Protrusion | 4 mm | 0.5 – 10 |
| Leg-to-Actuator Clearance | 0.05 mm | 0.02 – 0.08 |
| Leg / Actuator Tip Chamfer | 0.1 mm | 0 – 0.15 |
| Press Face Edge Fillet | 0.05 mm | 0 – 0.15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no