Enclosures and housings
Phone Case with Deployable Safety Bars
- Bounding box
- 154.0 × 79.0 × 61.8 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- August 11, 2026
Download
Free to download and use. See the terms.
The prompt
Add two new components on the front (over the display) of the case, two slender brushed-steel rigid safety bars.have rotated 90° on hinges at the top and bottom short edges and now stand up near the centerline of each face. Critically, each deployed bar does NOT lie flush against the display or back panel — because its hinge is set back inside the case wall, the bar hovers clearly off the surface, with a visible 20mm air gap
Parameters
| Name | Value | Range |
|---|---|---|
| Phone Length | 150 mm | 100 – 250 |
| Phone Width | 75 mm | 50 – 150 |
| Phone Thickness | 8 mm | 4 – 20 |
| Wall Thickness | 2 mm | 0.5 – 5 |
| Corner Radius | 8 mm | 0 – 20 |
| Groove Width | 4 mm | 1 – 10 |
| Groove Depth | 1 mm | 0.2 – 3 |
| Back Groove Offset | 3 mm | 0 – 20 |
| Top Groove Offset | 3 mm | 0 – 20 |
| Bar Width (Z) | 4 mm | 1 – 10 |
| Bar Thickness (Y) | 2 mm | 0.5 – 5 |
| Air Gap | 20 mm | 5 – 50 |
| Hinge Block Length (X) | 10 mm | 5 – 30 |
| Hinge Embed Depth | 2 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox