Enclosures and housings
Pharma Enclosure Assembly
- Bounding box
- 156.0 × 266.0 × 346.4 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- August 8, 2026
Download
Free to download and use. See the terms.
The prompt
A rectangular electronic enclosure box designed for pharmaceutical standards, with internal dimensions: width 250mm, height 330mm, depth 140mm, and wall thickness 4mm. The roof is sloped at a 25-degree angle descending toward the back. On the top center of the roof, include an 80mm circular hole for a sensor conduit. On the bottom floor center, include a 16mm circular hole for a cable gland. On the lower-left side wall, include a 7mm circular hole for an antenna mamparo. The front cover features a central rectangular cutout of 85x55mm for a display screen, a 24mm circular hole below it for a fingerprint sensor, and a central circular inspection port with a 4-bolt pattern for a camera
Parameters
| Name | Value | Range |
|---|---|---|
| Inner Width | 250 mm | 100 – 500 |
| Inner Height | 330 mm | 200 – 500 |
| Inner Depth | 140 mm | 80 – 300 |
| Wall Thickness | 4 mm | 1 – 10 |
| Roof Slope | 25 deg | 0 – 45 |
| Sensor Hole Dia | 80 mm | 20 – 200 |
| Cable Gland Hole Dia | 16 mm | 5 – 50 |
| Antenna Hole Dia | 7 mm | 2 – 20 |
| Antenna X Offset from Front | 20 mm | 5 – 130 |
| Antenna Z Offset from Bottom | 40 mm | 5 – 320 |
| Cover Thickness | 4 mm | 1 – 10 |
| Display Cutout Width | 85 mm | 20 – 200 |
| Display Cutout Height | 55 mm | 20 – 150 |
| Fingerprint Hole Dia | 24 mm | 5 – 50 |
| Fingerprint Gap | 5 mm | 1 – 20 |
| Camera Hole Dia | 20 mm | 5 – 100 |
| Camera Bolt Circle Dia | 30 mm | 10 – 80 |
| Camera Bolt Hole Dia | 3 mm | 1 – 10 |
| Camera Gap | 5 mm | 1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox