Everything else
PETG riduttore 16:1 rev D - due stadi ingranaggi prova
- Bounding box
- 94 × 94 × 19 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
Due stadi con dentature involute BOSL2, solare 18, pianeti 18, anello 54 ricavato per sottrazione; da verificare accuratamente interferenze e fase denti. Perni PETG separati da progettare.
Parameters
| Name | Value | Range |
|---|---|---|
| Gear module mm | 1.5 mm | 1.3 – 1.7 |
| Gear face mm | 7 mm | 5 – 9 |
| Radial ring gear clearance mm | 0.18 mm | 0.1 – 0.3 |
| Printed axle diameter mm | 6 mm | 5.5 – 6.5 |
| Diametral planet bore clearance mm | 0.4 mm | 0.2 – 0.6 |
| Ring gear wall mm | 5 mm | 4 – 7 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
Hexapod Robot with Stewart Platform
parallel platforms hexapod , stewart gough platform