Brackets and mounts
Pen Shell with Rear Battery Pod (2 Halves)
- Bounding box
- 13.8 × 145.0 × 27.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing 145mm pen shell. Add a widened, rounded rectangular battery pod at the rear end, approximately 37mm long, 27mm wide and 12mm thick. Create an internal battery holder cavity 36.5 x 26.5 x 7mm. Keep the pen split into two separate lengthwise printable halves. Preserve the hollow ink channel. Return exactly one fenced openscad code block with the complete updated model and no other text.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 145 mm | 60 – 300 |
| Barrel Outer Diameter | 14 mm | 6 – 40 |
| Ink Channel Diameter | 7 mm | 2 – 30 |
| Wall Ahead of Pod | 3 mm | 1 – 12 |
| Mouth Rim Fillet | 0.8 mm | 0 – 3 |
| Half Separation (layout) | 0.2 mm | 0 – 3 |
| Pod Length | 37 mm | 15 – 90 |
| Pod Width | 27 mm | 10 – 60 |
| Pod Thickness | 12 mm | 6 – 40 |
| Pod Corner Radius | 2 mm | 0 – 6 |
| Battery Cavity Length | 36.5 mm | 10 – 88 |
| Battery Cavity Width | 26.5 mm | 8 – 58 |
| Battery Cavity Depth | 7 mm | 3 – 38 |
| Cavity Corner Radius | 1 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
