Brackets and mounts
PCB Control Box Body
- Bounding box
- 74 × 40 × 9 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
The main body of a control box, with all length units in millimeters, measures 74 in length and 40 in width. Inside, there are four pillars for mounting PCBs. The pillars are divided into two sections: the lower section has a diameter of 5, and the upper section has a diameter of 3. The height of the lower section of the pillar is 3, and the height of the upper section is 2. The height of the four walls of the box is 9, and the rounded corners of the four corners of the box are 5
Parameters
| Name | Value | Range |
|---|---|---|
| Outer length | 74 mm | 20 – 200 |
| Outer width | 40 mm | 20 – 120 |
| Outer wall height | 9 mm | 5 – 30 |
| Wall thickness | 2 mm | 1.2 – 6 |
| Floor thickness | 2 mm | 1.2 – 6 |
| Outer corner radius | 5 mm | 1 – 15 |
| Lower pillar diameter | 5 mm | 3 – 10 |
| Lower pillar height | 3 mm | 1 – 10 |
| Upper pillar diameter | 3 mm | 2 – 8 |
| Upper pillar height | 2 mm | 1 – 10 |
| Pillar edge clearance to inner wall | 1.5 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
