Enclosures and housings
PCB Assembly with Components
- Bounding box
- 108.0 × 108.0 × 2.6 mm
- Engine
- Precision B-rep
- Parameters
- 53
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
do the engg diagram, Circle of 108 mm dia a square within the circle of side 70.711mm, both the centre of the circle and the circle and square coincde, and the square should not be in the CAD, square drawn such that the 2.4mm dia circle can be constructed at the corners of the square not, so the CAD should be like four 2.4 mm circles within the big circle of 108mm equally spaced from each other, Within that i want u to place the below things, but ensuring nothing on top of the 4 cicrles as they should be etched out a rectangle named BNO055: 25.4mm x 20.32 mm a rectangle named BME280: 15.5mm x 12 mm a rectangle name JST Connector (4 Pin GPS): 9.16 mm x 1 mm a rectangle named ESP32 S3: 27.94 mm x 57.15 mm a rectangle name JST Connector (2 Pin UART MCU-MCU): 4.58 mm x 1mm a rectangle name JST Connector (3 Pin Lid Servo): 9.16 mm x 1 mm a rectangle name JST Connector (3 Pin P2 Actuation): 9.16 mm x 1 mm a rectangle name JST Connector (3 Pin P2 Actuation): 9.16 mm x 1 mm a rectangle named BMP280: 20mm x 20 mm a rectangle named ICM-20948: 20mm x 17 mm a rectangle name JST Connector (3 Pin Lid power rail): 9.16 mm x 1 mm a rectangle name SD Card Logger: 24mm x 45mm if the components dont fit inside the given dimensions then Iremme know go ahead and generate the most acccurate CAD Engg drawing
Parameters
| Name | Value | Range |
|---|---|---|
| PCB Diameter | 108 mm | 50 – 200 |
| PCB Thickness | 1.6 mm | 0.5 – 5 |
| Hole Diameter | 2.4 mm | 1 – 5 |
| Hole Offset (±) | 35.35 mm | 20 – 50 |
| Component Height | 2 mm | 0.5 – 5 |
| ESP32-S3 Width (X) | 27.94 mm | 5 – 100 |
| ESP32-S3 Length (Y) | 57.15 mm | 5 – 100 |
| ESP32-S3 X Position | 0 mm | -54 – 54 |
| ESP32-S3 Y Position | 0 mm | -54 – 54 |
| SD Card Logger Width (X) | 24 mm | 5 – 100 |
| SD Card Logger Length (Y) | 45 mm | 5 – 100 |
| SD Card Logger X Position | -30 mm | -54 – 54 |
| SD Card Logger Y Position | 0 mm | -54 – 54 |
| BNO055 Width (X) | 25.4 mm | 5 – 100 |
| BNO055 Length (Y) | 20.32 mm | 5 – 100 |
| BNO055 X Position | 0 mm | -54 – 54 |
| BNO055 Y Position | 39 mm | -54 – 54 |
| BME280 Width (X) | 15.5 mm | 5 – 100 |
| BME280 Length (Y) | 12 mm | 5 – 100 |
| BME280 X Position | 0 mm | -54 – 54 |
| BME280 Y Position | -39 mm | -54 – 54 |
| BMP280 Width (X) | 20 mm | 5 – 100 |
| BMP280 Length (Y) | 20 mm | 5 – 100 |
| BMP280 X Position | 24 mm | -54 – 54 |
| BMP280 Y Position | 20 mm | -54 – 54 |
| ICM-20948 Width (X) | 20 mm | 5 – 100 |
| ICM-20948 Length (Y) | 17 mm | 5 – 100 |
| ICM-20948 X Position | 24 mm | -54 – 54 |
| ICM-20948 Y Position | -20 mm | -54 – 54 |
| JST 4 Pin GPS Width (X) | 1 mm | 0.5 – 20 |
| JST 4 Pin GPS Length (Y) | 9.16 mm | 0.5 – 20 |
| JST 4 Pin GPS X Position | 50.5 mm | -54 – 54 |
| JST 4 Pin GPS Y Position | 0 mm | -54 – 54 |
| JST 2 Pin UART Width (X) | 4.58 mm | 0.5 – 20 |
| JST 2 Pin UART Length (Y) | 1 mm | 0.5 – 20 |
| JST 2 Pin UART X Position | -51 mm | -54 – 54 |
| JST 2 Pin UART Y Position | 0 mm | -54 – 54 |
| JST 3 Pin Lid Servo Width (X) | 9.16 mm | 0.5 – 20 |
| JST 3 Pin Lid Servo Length (Y) | 1 mm | 0.5 – 20 |
| JST 3 Pin Lid Servo X Position | 0 mm | -54 – 54 |
| JST 3 Pin Lid Servo Y Position | 52 mm | -54 – 54 |
| JST 3 Pin P2 Actuation 1 Width (X) | 9.16 mm | 0.5 – 20 |
| JST 3 Pin P2 Actuation 1 Length (Y) | 1 mm | 0.5 – 20 |
| JST 3 Pin P2 Actuation 1 X Position | 0 mm | -54 – 54 |
| JST 3 Pin P2 Actuation 1 Y Position | -52 mm | -54 – 54 |
| JST 3 Pin P2 Actuation 2 Width (X) | 9.16 mm | 0.5 – 20 |
| JST 3 Pin P2 Actuation 2 Length (Y) | 1 mm | 0.5 – 20 |
| JST 3 Pin P2 Actuation 2 X Position | 22 mm | -54 – 54 |
| JST 3 Pin P2 Actuation 2 Y Position | -44 mm | -54 – 54 |
| JST 3 Pin Lid Power Rail Width (X) | 9.16 mm | 0.5 – 20 |
| JST 3 Pin Lid Power Rail Length (Y) | 1 mm | 0.5 – 20 |
| JST 3 Pin Lid Power Rail X Position | 22 mm | -54 – 54 |
| JST 3 Pin Lid Power Rail Y Position | 44 mm | -54 – 54 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox