Enclosures and housings
Pawl - 3 mm Steel Plate
- Bounding box
- 18.2 × 8.0 × 3.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- October 22, 2026
Download
Free to download and use. See the terms.
The prompt
You are a CAD generator. Create ONE single solid part (not an assembly), units millimetres, exact dimensions as given. Export STEP. Do not add extra features that are not listed. Origin at the centre of the bottom face, axis along Z. Part: pawl, steel plate, 3.0 thick. Pivot hole diameter 3 (H7) at the origin. Boss radius 4 around the pivot hole. From the boss an arm tapers to a flat tip: width 4.4 at 11.0 from the hole centre, width 0.8 at 14.2 from the hole centre. Overall length from the far side of the boss to the tip: 18.2.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Thickness | 3 mm | 0.5 – 10 |
| Pivot Hole Dia (H7) | 3 mm | 1 – 10 |
| Boss Radius | 4 mm | 2.5 – 12 |
| Overall Length (boss back to tip) | 18.2 mm | 10 – 60 |
| Arm Width at Reference Station | 4.4 mm | 1 – 15 |
| Reference Station from Hole Centre | 11 mm | 5 – 40 |
| Flat Tip Width | 0.8 mm | 0.2 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no