Enclosures and housings
Passive 90-degree turning guide for rectangular workpiece
- Bounding box
- 70.0 × 56.0 × 306.9 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- October 19, 2026
Download
Free to download and use. See the terms.
The prompt
Create a simple parametric CAD model of a passive 90-degree turning guide for a rectangular workpiece. Workpiece: - length: 200 mm - width: 30 mm - thickness: 8 mm Function: The workpiece enters the guide horizontally. Gravity moves the workpiece downward through the guide. During this movement, the guide geometry causes the rectangular workpiece to rotate by 90 degrees. At the bottom, the workpiece rests in a defined position so that a robot gripper can pick it up. Design requirements: - simple geometry - open guide - no motor - no actuator - gravity driven - sufficient clearance around the workpiece - large entry opening - mechanical end stop at the bottom - suitable for manufacturing from simple machined or sheet-metal components Create only the CAD geometry. Return the result strictly as one valid JSON object with exactly these top-level fields: "title", "param_schema", "script". Do not return Markdown. Do not use code fences. Do not add explanations before or after the JSON. Do not return the JSON as a quoted string.
Parameters
| Name | Value | Range |
|---|---|---|
| Workpiece Length | 200 mm | 100 – 500 |
| Workpiece Width | 30 mm | 10 – 100 |
| Workpiece Thickness | 8 mm | 2 – 30 |
| Clearance (per side) | 6 mm | 1 – 15 |
| Wall Thickness | 4 mm | 1 – 10 |
| Twist Angle | 90 deg | 0 – 180 |
| Bottom Stop Thickness | 6 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no