Enclosures and housings
Parametric Formula 1 Race Car Assembly
- Bounding box
- 5475.0 × 2357.6 × 995.1 mm
- Engine
- Precision B-rep
- Parameters
- 71
- Published
- October 25, 2026
Download
Free to download and use. See the terms.
The prompt
# Project: Detailed Formula 1 Race Car CAD Model Act as a professional automotive CAD engineer specializing in Formula 1 race car design, aerodynamics, mechanical engineering, and parametric 3D modeling. Create a detailed, dimensionally consistent, editable 3D CAD model of a modern Formula 1-style race car. ## Design requirements - Open-wheel, single-seat racing car. - Front and rear wings with realistic geometry. - Monocoque chassis and cockpit. - Halo safety structure. - Four exposed wheels with detailed rims and tires. - Front and rear suspension assemblies. - Sidepods and cooling inlets. - Floor, underfloor tunnels, and rear diffuser. - Engine cover and rear bodywork. - Steering wheel and cockpit details. - Brake discs and wheel hubs. - Realistic proportions and symmetrical components where appropriate. ## CAD requirements - Use parametric sketches, dimensions, constraints, and editable features. - Create separate components for the chassis, wings, suspension, wheels, tires, bodywork, halo, and floor. - Use a consistent coordinate system and appropriate units. - Avoid intersecting components and invalid solid geometry. - Keep components organized in a proper assembly tree. - Ensure the model can be edited without rebuilding it from scratch. ## Dimensions Use plausible dimensions for a modern Formula 1-style car, approximately 5.5 metres long and 1.9–2.0 metres wide. Treat these as initial design targets, not official specifications. Define the wheelbase, track width, tire dimensions, and body clearances as editable parameters. ## Deliverables 1. Complete editable 3D CAD model. 2. Individual component models. 3. Full assembly. 4. Orthographic front, rear, side, and top views. 5. Isometric rendered view. 6. Dimensioned engineering drawings. 7. STEP export for interoperability. 8. STL export for 3D printing. 9. Native project file for the selected CAD software. Use manufacturable geometry wherever practical. Clearly distinguish conceptual aerodynamic surfaces from production-ready mechanical components. Do not present the model as an official or FIA-validated design. Prioritize a complete, valid, editable CAD assembly over a visually impressive but uneditable mesh. Verify the model's geometry before delivering it.
Parameters
| Name | Value | Range |
|---|---|---|
| Wheelbase | 3600 mm | 3000 – 4200 |
| Front Track Width | 1600 mm | 1400 – 1800 |
| Rear Track Width | 1500 mm | 1300 – 1700 |
| Ride Height (floor bottom) | 50 mm | 20 – 100 |
| Chassis Length | 3000 mm | 2500 – 3500 |
| Chassis Width | 900 mm | 700 – 1100 |
| Chassis Height | 700 mm | 500 – 900 |
| Cockpit Opening Length | 800 mm | 500 – 1200 |
| Cockpit Opening Width | 500 mm | 300 – 700 |
| Cockpit Opening Depth | 400 mm | 200 – 600 |
| Cockpit Center X Position | 0 mm | -500 – 500 |
| Floor Length | 3500 mm | 3000 – 4000 |
| Floor Width | 1400 mm | 1200 – 1600 |
| Floor Thickness | 150 mm | 50 – 250 |
| Diffuser Ramp Length | 400 mm | 200 – 600 |
| Diffuser Ramp Height | 100 mm | 50 – 200 |
| Front Wing Offset Ahead of Front Axle | 700 mm | 400 – 1000 |
| Front Wing Span | 1900 mm | 1600 – 2200 |
| Front Wing Chord | 350 mm | 250 – 500 |
| Front Wing Endplate Height | 200 mm | 100 – 300 |
| Front Wing Main Plane Thickness | 30 mm | 10 – 60 |
| Front Wing Flap Chord | 120 mm | 50 – 200 |
| Front Wing Flap Thickness | 10 mm | 5 – 30 |
| Front Wing Endplate Thickness | 5 mm | 2 – 15 |
| Front Wing Pylon Radius | 10 mm | 5 – 20 |
| Front Wing Center Z Height | 250 mm | 100 – 400 |
| Rear Wing Span | 1050 mm | 800 – 1300 |
| Rear Wing Chord | 450 mm | 300 – 600 |
| Rear Wing Endplate Height | 250 mm | 150 – 350 |
| Rear Wing Center Z Height | 850 mm | 600 – 1100 |
| Rear Wing Main Plane Thickness | 30 mm | 10 – 60 |
| Rear Wing Flap Chord | 150 mm | 50 – 250 |
| Rear Wing Flap Thickness | 10 mm | 5 – 30 |
| Rear Wing Endplate Thickness | 5 mm | 2 – 15 |
| Sidepod Length | 1600 mm | 1200 – 2000 |
| Sidepod Width | 600 mm | 400 – 800 |
| Sidepod Height | 500 mm | 300 – 700 |
| Sidepod Center X Position | 0 mm | -500 – 500 |
| Sidepod Cooling Inlet Width | 300 mm | 100 – 500 |
| Sidepod Cooling Inlet Height | 200 mm | 100 – 300 |
| Sidepod Cooling Inlet Depth | 100 mm | 20 – 200 |
| Engine Cover Center X Position | -1900 mm | -2400 – -1400 |
| Engine Cover Length | 1800 mm | 1400 – 2200 |
| Engine Cover Width | 600 mm | 400 – 800 |
| Engine Cover Front Height | 500 mm | 300 – 700 |
| Engine Cover Rear Height | 180 mm | 100 – 400 |
| Airbox Length | 300 mm | 100 – 500 |
| Airbox Width | 250 mm | 100 – 400 |
| Airbox Height | 200 mm | 100 – 400 |
| Halo Width | 800 mm | 500 – 1000 |
| Halo Length | 900 mm | 600 – 1200 |
| Halo Tube Diameter | 100 mm | 50 – 150 |
| Front Tire Diameter | 720 mm | 600 – 800 |
| Front Tire Width | 305 mm | 200 – 400 |
| Rear Tire Diameter | 720 mm | 600 – 800 |
| Rear Tire Width | 405 mm | 300 – 500 |
| Rim Diameter | 330 mm | 250 – 450 |
| Front Rim Width | 280 mm | 180 – 350 |
| Rear Rim Width | 380 mm | 280 – 450 |
| Brake Disc Diameter | 330 mm | 200 – 400 |
| Brake Disc Thickness | 30 mm | 10 – 50 |
| Hub Radius | 60 mm | 30 – 100 |
| Hub Height (Length along axle) | 100 mm | 50 – 150 |
| Front Suspension Arm Length | 500 mm | 300 – 700 |
| Rear Suspension Arm Length | 500 mm | 300 – 700 |
| Suspension Tube Diameter | 20 mm | 10 – 40 |
| Steering Wheel Diameter | 280 mm | 200 – 350 |
| Steering Wheel Thickness | 20 mm | 5 – 50 |
| Seat Width | 400 mm | 250 – 500 |
| Seat Depth | 500 mm | 300 – 700 |
| Seat Height | 200 mm | 100 – 400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no