Enclosures and housings
Parametric fixture plate
- Bounding box
- 160.0 × 100.0 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Mechanical part: Parametric fixture plate Units: millimeters Create one printable solid body. Base plate Length 160 Width 100 Thickness 3 Centered rectangular through cutout Length 133.5 Width 74.4 The cutout passes completely through the plate. Create four cylindrical through holes. Diameter 5 Hole centers located 10 mm from every outer edge. Create six rectangular extrusions connected to the base plate. Extrusion 1 Position: Left side of the cutout Dimensions: 55 x 3.5 x 12 Orientation: Parallel to the long side of the cutout Centered along the cutout length. Extrusion 2 Position: Right side of the cutout Dimensions: 55 x 3.5 x 12 Orientation: Parallel to the long side of the cutout Centered along the cutout length. Extrusion 3 Position: Rear left corner of the cutout Dimensions: 15 x 8 x 8 Extrusion 4 Position: Rear right corner of the cutout Dimensions: 15 x 8 x 8 Distance between extrusion 3 and extrusion 4: 100 Extrusion 5 Position: Front left corner of the cutout Dimensions: 16 x 12 x 12 The upper front edge extends inward 12 mm. The lower face creates a retaining lip. Extrusion 6 Position: Front right corner of the cutout Dimensions: 16 x 12 x 12 Mirror of extrusion 5. All extrusions are fused with the base plate. No additional geometry. No walls. No tray. No separate bodies. Bottom surface perfectly flat. Generate editable parameters for every dimension.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate length | 160 mm | 100 – 300 |
| Plate width | 100 mm | 50 – 200 |
| Plate thickness | 3 mm | 1 – 10 |
| Cutout length | 133.5 mm | 50 – 250 |
| Cutout width | 74.4 mm | 30 – 150 |
| Hole diameter | 5 mm | 2 – 20 |
| Hole offset from edge | 10 mm | 5 – 30 |
| Extrusion 1&2 length (along cutout) | 55 mm | 20 – 140 |
| Extrusion 1&2 width (outward) | 3.5 mm | 1 – 10 |
| Extrusion 1&2 height | 12 mm | 2 – 25 |
| Extrusion 3&4 length (X) | 15 mm | 5 – 30 |
| Extrusion 3&4 width (Y) | 8 mm | 5 – 20 |
| Extrusion 3&4 height | 8 mm | 2 – 20 |
| Outer‑edge distance 3‑4 | 100 mm | 50 – 150 |
| Extrusion 5&6 length (X) | 16 mm | 10 – 40 |
| Extrusion 5&6 base width (Y outward) | 12 mm | 5 – 25 |
| Lip inward overhang | 12 mm | 0 – 25 |
| Extrusion 5&6 height | 12 mm | 2 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no