Mechanical parts
Parametric FDM Rhombic Scissor Jack — Exploded Parts
- Bounding box
- 2300.5 × 30.0 × 30.0 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Design a parametric CAD model of a small scissor jack (rhombic jack) for FDM 3D printing. It is a light-duty demonstration device, not for lifting a car. Folded size about [120×45×30] mm, lift range [20–80] mm, estimated load [2–5 kg max]. Material [PLA/PETG]. Mechanism: 4 arms, central [M6] screw, two nuts/bushings, lower and upper supports, [M4] pins/bolts. Arm length [60] mm, cross-section [10×8] mm, pin holes [4.2] mm, support thickness [6] mm. FDM clearances: [0.3] mm in moving joints, holes +[0.2] mm, chamfers/fillets. Generate separate parts, not a fused model: lower support, upper support, 4 arms, 2 nuts/bushings, pins/axles, screw. Allow use of a metal screw and metal nuts. Output assembly plus individual STEP and STL files, dimension table, print orientation/support/infill recommendations. If a parameter is missing, choose a reasonable value and state it. Check that the mechanism folds/unfolds without collisions.
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded Row Slot Gap | 180 mm | 90 – 350 |
| Support Plate Length | 45 mm | 30 – 80 |
| Support Plate Width | 30 mm | 20 – 60 |
| Support Plate Thickness | 6 mm | 3 – 10 |
| Support Lug Depth | 16 mm | 8 – 30 |
| Support Lug Height | 14 mm | 8 – 25 |
| Support Lug Thickness | 4 mm | 2 – 8 |
| Support Fillet Radius | 1 mm | 0 – 3 |
| Moving Joint Clearance | 0.3 mm | 0.1 – 1 |
| Pin Hole Diameter | 4.2 mm | 4 – 8 |
| Arm Overall Length | 60 mm | 30 – 120 |
| Arm Width | 10 mm | 6 – 20 |
| Arm Thickness | 8 mm | 4 – 15 |
| Arm Hole Center Distance | 50 mm | 30 – 110 |
| Arm Fillet Radius | 1 mm | 0 – 3 |
| Nut/Bushing Outer Diameter | 14 mm | 10 – 25 |
| Nut/Bushing Length | 8 mm | 5 – 15 |
| Nut/Bushing Bore Diameter | 6.4 mm | 5 – 10 |
| Pin Shaft Diameter | 4 mm | 3 – 8 |
| Pin Grip Length | 18 mm | 10 – 30 |
| Pin Head Diameter | 8 mm | 5 – 15 |
| Pin Head Thickness | 3 mm | 1 – 6 |
| Central Screw Diameter | 6 mm | 4 – 10 |
| Central Screw Overall Length | 130 mm | 100 – 180 |
| Central Screw Knob Diameter | 20 mm | 10 – 35 |
| Central Screw Knob Thickness | 12 mm | 5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
Two-Joint Robotic Arm with Parallel Gripper
i want a 2 joint robotic arm with parallel gripper simple design. Servo-Base: smart/serial-bus servo, true 360° positional control. Turret rides on a bearing so the servo only driv
