3D preview of Parametric DNA Helix Pedestal
Loading the interactive model…
Interactive 3D model of Parametric DNA Helix Pedestal

Brackets and mounts

Parametric DNA Helix Pedestal

2 views
Bounding box
150 × 150 × 30 mm
Engine
3D Printing B-rep
Parameters
16
Published
November 18, 2026

Download

Free to download and use. See the terms.

The prompt

Create a parametric, 3D-printable circular pedestal for a modular DNA double-helix school model. **Main geometry:** - Overall bottom diameter: 150 mm. - Top platform diameter: 100 mm. - Total height: 30 mm. - Tapered cylindrical body. - Flat top and bottom surfaces. **Strand mounting system:** - Two rectangular mounting sockets on the top surface. - Socket centers must be 34 mm apart. - Both sockets must be symmetrical around the central axis. - Each socket is 8 mm wide. - Socket insertion depth: 10 mm. - The sockets must accommodate removable DNA strand connectors. **Appearance:** - Black pedestal. - Gold decorative lower rim. - Optional recessed front nameplate. - Smooth, clean surfaces. **Engineering requirements:** - Make the model a single solid printable body. - Ensure the sockets are real openings with sufficient wall thickness. - Keep the geometry editable and parametric. - Check dimensions and geometry before exporting. - Provide an STL file and an editable CAD file. Before generating, show me your interpretation of the geometry and ask about any missing dimensions. Do not invent unspecified measurements.

Parameters

NameValueRange
Overall bottom diameter150 mm100 – 200
Top platform diameter100 mm60 – 150
Total height30 mm20 – 60
Decorative lower rim height3 mm1 – 8
Lower rim inward step1.5 mm0.2 – 5
Bottom edge chamfer1 mm0.2 – 3
Top edge chamfer1 mm0.2 – 3
Socket center spacing34 mm20 – 70
Socket width8 mm5 – 15
Socket length along Y14 mm8 – 30
Socket insertion depth10 mm5 – 20
Socket entry chamfer0.8 mm0 – 2
Nameplate recess width28 mm10 – 60
Nameplate recess length6 mm3 – 20
Nameplate recess depth, 0 = off0.8 mm0 – 2
Nameplate center Y position-36 mm-45 – -20

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.