3D preview of Parametric Bracket Plate - Row 6
Loading the interactive model…
Interactive 3D model of Parametric Bracket Plate - Row 6

Brackets and mounts

Parametric Bracket Plate - Row 6

1 views
Bounding box
146.3 × 157.2 × 23.0 mm
Engine
Precision B-rep
Parameters
22
Published
November 17, 2026

Download

Free to download and use. See the terms.

The prompt

Please generate the precise 3D parametric CAD model for the mechanical bracket plate based on the provided engineering drawing, using these exact parameters for Row 6: - **Central Hub (Upper Cylinder):** Outer diameter D6 = 74.58 mm, Through-hole diameter D4 = 25.00 mm, Height E2 = 22.00 mm. - **Bolt Circle Pattern:** Pitch circle diameter D5 = 47.50 mm, containing N = 9 evenly spaced through-holes each with diameter D3 = 9.01 mm. - **Lower Mounting Bosses (Ojal/Bases):** Left boss diameter D1 = 22.73 mm, Right boss diameter D2 = 45.45 mm, positioned symmetrically at an angle A1 = 30.00 degrees from the vertical centerline. - **Reinforcing Ribs:** Width L1 = 6.00 mm, blended into the bosses and hub with fillet radius R1 = 7.00 mm. - **Body Contours & Radii:** Outer side arcs radius R4 = 102.00 mm, main body spine radius R2 = 112.20 mm, and bottom central cutout arc radius R3 = 33.93 mm. - **Thicknesses & Heights (Z-axis dimensions):** Main base plate thickness E1 = 14.00 mm, right block height E4 = 23.00 mm, left block height E5 = 18.00 mm, lower positioning reference E3 = 21.00 mm, and internal step offsets E6 = 6.00 mm / E7 = 6.00 mm. Construct the geometry step by step: build the main plate with the lower bosses and cutout, extrude the central hub with its 9-hole circular pattern, add the structural ribs, and apply the correct step thicknesses.

Parameters

NameValueRange
D6 Hub Outer Diameter74.58 mm10 – 300
D4 Hub Through Bore25 mm1 – 150
E2 Hub Height22 mm1 – 150
D5 Bolt Pitch Circle Diameter47.5 mm5 – 250
N Bolt Hole Count9 count3 – 24
D3 Bolt Hole Diameter9.01 mm0.5 – 30
D1 Left Boss Diameter22.73 mm2 – 120
D2 Right Boss Diameter45.45 mm2 – 120
A1 Boss Angle From Vertical30 deg5 – 85
L1 Rib Width6 mm0.5 – 30
R1 Rib Blend Fillet7 mm0.5 – 20
R2 Main Body Spine Radius112.2 mm20 – 400
R4 Outer Side Arc Radius102 mm20 – 500
R3 Bottom Cutout Arc Radius33.93 mm2 – 150
E1 Base Plate Thickness14 mm1 – 100
E4 Right Block Height23 mm1 – 150
E5 Left Block Height18 mm1 – 150
E3 Lower Positioning Reference / Rib Height21 mm1 – 150
E6 Left Internal Step Offset6 mm0 – 50
E7 Right Internal Step Offset6 mm0 – 50
Assumed Lower Boss Bore10 mm0.5 – 50
Assumed Lower Boss Counterbore16 mm1 – 80

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Parametric Bracket Plate - Row 6 - Free CAD Model (STEP, STL) | TextoCAD