Enclosures and housings
Panel-Construction Console Table 75x22x30
- Bounding box
- 1905.0 × 559.0 × 762.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- September 27, 2026
Download
Free to download and use. See the terms.
The prompt
Overall Dimensions: Length: 75 inches Width/Depth: 22 inches Overall Height: 30 inches Tabletop thickness: 1.5 inches Tabletop: Create one continuous rectangular tabletop measuring 75" L × 22" W × 1.5" thick. Use a clean, square edge with a slightly softened/sanded corner. The tabletop should overhang the supporting structure slightly on the front and sides, similar to the reference. Main Body / Back Panel: Add a full-width rear panel beneath the tabletop. Rear panel runs approximately the full 75" length. Panel extends from underneath the tabletop down toward the floor. Keep the rear panel visually similar to the large solid panel shown in the reference image. Left Side: Add a full-height left side panel/leg beneath the tabletop. The left side supports the tabletop and connects to the rear panel. Right-Side Cabinet: Create a cabinet/storage section at the right end of the table. Include two vertical side panels supporting the tabletop. Add one horizontal shelf approximately halfway up the cabinet opening. Leave the front of the storage area open. The cabinet should visually match the open shelving arrangement in the reference image. Center Divider: Add one vertical divider panel between the large open area and the right-side shelving. Divider extends from the underside of the tabletop down to the floor. Position it approximately 55–60 inches from the left end, leaving the remaining 15–20 inches for the shelving section. Leg/Support Configuration: The table should have a clean, built-in appearance rather than four traditional individual legs. Use the side panels and center divider as structural supports. Keep the large area underneath the left portion open. Proportions: Overall: 75"W × 22"D × 30"H Top: 75"W × 22"D × 1.5"H Maintain the proportions and overall visual appearance of the supplied reference image while scaling it to the new dimensions. Style: Simple contemporary woodworking design. Straight lines. Flat rectangular panels. Minimal decorative details. Natural wood appearance. Designed to be practical and straightforward to build. Short version for an image/CAD generator Create a woodworking table based on the supplied reference image. Overall dimensions: 75" long × 22" deep × 30" high. Use a 1.5" thick rectangular tabletop. Include a full-width rear panel, full-height left side support, a center vertical divider, and an open storage cabinet on the right with one horizontal shelf. Keep the large area underneath the left side open. Use panel-style construction rather than traditional legs. Maintain the same overall visual proportions and construction concept as the reference image, but scale the design precisely to 75"W × 22"D × 30"H. Natural wood, clean square edges, simple contemporary woodworking style.
Parameters
| Name | Value | Range |
|---|---|---|
| Tabletop Length | 1905 mm | 600 – 3000 |
| Tabletop Depth | 559 mm | 300 – 1200 |
| Tabletop Thickness | 38 mm | 12 – 80 |
| Corner Soften Radius | 3 mm | 0.5 – 12 |
| Overall Height | 762 mm | 400 – 1200 |
| Panel Thickness | 18 mm | 6 – 40 |
| Divider From Left End | 1431 mm | 100 – 2800 |
| Shelf Width | 438 mm | 100 – 2600 |
| Shelf Center Height | 362 mm | 50 – 700 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no