3D preview of PAIRIQ ONE Enclosure
Loading the interactive model…
Interactive 3D model of PAIRIQ ONE Enclosure

Brackets and mounts

PAIRIQ ONE Enclosure

1 views
Bounding box
320 × 80 × 27 mm
Engine
3D Printing B-rep
Parameters
34
Published
November 17, 2026

Download

Free to download and use. See the terms.

The prompt

Create a functional 3D-printable handheld electronics enclosure named PAIRIQ ONE, 150×80×30 mm, with rounded corners. Make TWO separate parts: a hollow open-top base and removable lid, both with 3 mm walls. Include four M3 lid screw mounts, four Raspberry Pi Zero 2 W standoffs with 58×23 mm hole spacing for M2.5 screws, a 50×30 mm screen opening, four 7 mm button holes, two LED holes, a 6.5 mm antenna connector hole, USB-C and power switch cutouts. Reserve interior space for RF electronics and a battery. Add a locating lip to the lid with 0.3 mm clearance. Ensure parts do not overlap and are printable on a Bambu A1 Mini. Export separate STL solids.

Parameters

NameValueRange
Outer width150 mm80 – 170
Outer depth80 mm50 – 120
Assembled height30 mm20 – 60
Wall / floor thickness3 mm1.2 – 6
Corner radius5 mm1 – 15
Lid plate thickness3 mm1.2 – 8
Locating lip height5 mm2 – 10
Locating lip thickness2.5 mm1.2 – 5
Locating lip clearance0.3 mm0.1 – 0.6
Gap between exploded parts20 mm5 – 60
Lid screw boss diameter7 mm5 – 12
Lid screw inset from outer edge10 mm6 – 25
M3 pilot hole diameter2.8 mm2.2 – 3.4
Pi standoff spacing X58 mm30 – 70
Pi standoff spacing Y23 mm10 – 40
Pi standoff pattern centre X25 mm-30 – 60
Pi standoff pattern centre Y-10 mm-30 – 30
Pi standoff diameter5.5 mm4 – 9
Pi standoff height5 mm2 – 12
M2.5 pilot hole diameter2.4 mm1.8 – 3
Battery pocket width60 mm20 – 100
Battery pocket depth40 mm15 – 60
Battery pocket centre Y-4 mm-20 – 20
Battery tray wall thickness1.5 mm1 – 4
Battery tray wall height8 mm3 – 20
Screen opening width50 mm20 – 100
Screen opening depth30 mm15 – 60
Button hole diameter7 mm3 – 12
LED hole diameter3 mm2 – 6
Antenna connector hole diameter6.5 mm3 – 12
USB-C cutout width9 mm5 – 16
USB-C cutout height4 mm2 – 10
Power switch cutout width8 mm4 – 16
Power switch cutout height4 mm2 – 10

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.