Enclosures and housings
Paddle mixer with SINGLE common 2-inlet interface hopper + DN150 digestate
- Bounding box
- 4150.0 × 1870.0 × 3740.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Revised real parametric CAD assembly, 4150mm paddle mixer with 2-3t rectangular supported hopper and metered feeder. The hopper-fed dry bulk material enters the TOP of one hollow shared inlet/manifold (inlet 1) after a slide gate and rotary metering feeder. A separate HORIZONTAL DN150 pipe with its own actuated valve and flange connects to the SIDE of the SAME manifold (inlet 2). The manifold has ONE bottom discharge into the paddle mixer. Distinguishes dry/wet feeds, not separate mixer penetrations. Preliminary GA only, not CFD, material flow or metering validated.
Parameters
| Name | Value | Range |
|---|---|---|
| Paddle mixer overall frame length | 4150 mm | 4150 – 4150 |
| Paddle mixer overall frame width provisional | 1300 mm | 1300 – 1300 |
| Paddle mixer reference overall height | 1048 mm | 1048 – 1048 |
| Mixer trough indicative length | 3000 mm | 3000 – 3000 |
| DN150 digestate outside diameter provisional | 168.3 mm | 168.3 – 168.3 |
| Rectangular hopper length | 1800 mm | 1800 – 1800 |
| Rectangular hopper width | 1700 mm | 1700 – 1700 |
| Hopper upper straight height | 900 mm | 900 – 900 |
| Hopper funnel height | 1150 mm | 1150 – 1150 |
| Provisional hopper plate thickness | 8 mm | 8 – 8 |
| Hopper square throat | 420 mm | 420 – 420 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,