8687230808
Loading the interactive model…
Interactive 3D model of Overhead Conveyor Hanger - L-Bent Support Rods

Brackets and mounts

Overhead Conveyor Hanger - L-Bent Support Rods

1 views
Bounding box
7230 × 868 × 808 mm
Engine
3D Printing B-rep
Parameters
15
Published
November 21, 2026

Download

Free to download and use. See the terms.

The prompt

Create a precise 3D mechanical engineering visualization of a modified overhead powder-coating conveyor hanger system. Objective: Modify only the lower ends of the two existing straight steel support rods. The modification must be an L-shaped bend with a 10 mm offset at both aluminum profile attachment points. Existing structure: * An overhead conveyor chain carries a hanger assembly. * Two long, straight steel support rods extend downward from the conveyor. * The rods are approximately 600–700 mm long. * The distance between the two rods is 6,000 mm. * The rods support a long aluminum extrusion profile. * The conveyor includes a U-shaped return curve. Required modification: 1. Keep both upper steel rods completely straight and unchanged. 2. Do not modify the conveyor chain or its attachment mechanism. 3. Introduce an L-shaped bend only at the bottom end of each steel rod. 4. The L-shaped bend must have a precise 20 cm offset. 5. Apply the same L-shaped configuration to both sides of the aluminum profile. 6. The bent ends must pass through the corresponding attachment points in the aluminum profile. 7. Keep the two supports symmetrical and aligned. 8. Do not introduce additional brackets, support structures, or unnecessary modifications. Visualization requirements: * Show the complete hanger assembly in 3D. * Provide a front view, side view, and detailed close-up of both L-shaped connections. * Clearly identify the 10 mm offset. * Show how the steel rods pass through the aluminum profile. * Include a separate comparison between the original straight-rod connection and the modified L-shaped connection. * Show the hanger in a U-shaped conveyor return section to illustrate the intended clearance improvement. Engineering considerations: The purpose of the modification is to improve mechanical clearance and reduce interference, tightening, and twisting when the conveyor passes through its U-shaped return section. Do not assume the modification is structurally safe without checking rod strength, bending stress, attachment security, profile stability, and dynamic clearance. Important: The 20 cm dimension refers to the horizontal offset of each L-shaped bend, not the rod diameter or bend radius. Do not change any other dimensions or components without explicit instruction. Style: Professional industrial CAD drawing, realistic steel materials, accurate mechanical geometry, white engineering background, clear dimension annotations, and technically consistent views.

Parameters

NameValueRange
Distance between the two rod axes6000 mm1000 – 8000
Straight vertical length of each rod650 mm400 – 900
Horizontal L-bend offset at the profile200 mm50 – 400
Rod diameter (the 10 mm callout)10 mm6 – 20
Centreline bend radius of the L-bend40 mm20 – 120
Rod tip depth inside the profile30 mm5 – 60
Profile depth, front-to-back60 mm30 – 120
Profile height80 mm30 – 160
Profile wall thickness4 mm2 – 10
Profile length beyond each rod150 mm0 – 400
Track width60 mm30 – 120
Track height50 mm20 – 120
Straight track run beyond each rod400 mm100 – 1000
U-shaped return curve radius400 mm150 – 900
Trolley roller diameter20 mm10 – 40

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Overhead Conveyor Hanger - L-Bent Support Rods - Free CAD Model (STEP, STL) | TextoCAD