Brackets and mounts
Outdoor Wireless CPE Enclosure
- Bounding box
- 240 × 112.4 × 425 mm
- Engine
- 3D Printing B-rep
- Parameters
- 24
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise, parametric, 3D-printable outdoor wireless CPE enclosure. Main enclosure dimensions: - Width: 240 mm - Height: 190 mm - Depth: 90 mm - Wall thickness: 3.5 mm Design requirements: - Separate removable front cover. - Two hollow cylindrical antenna radomes integrated into the cover. - Antenna height: 140 mm. - Antenna outer diameter: 22 mm. - Antenna inner diameter: 16 mm. - Four M4 screw mounting bosses. - 3 mm wide and 2 mm deep waterproof gasket groove. - Two bottom cable gland openings. - Rounded external corners. - Weather-resistant outdoor enclosure design. Generate editable parametric CAD geometry. Check wall thickness, clearances, watertight geometry, and assembly fit. Export separate STL files for the enclosure and cover, plus the editable CAD source.
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure width | 240 mm | 100 – 400 |
| Enclosure height | 190 mm | 80 – 400 |
| Enclosure depth | 90 mm | 30 – 250 |
| Wall thickness | 3.5 mm | 1.6 – 8 |
| External corner radius | 12 mm | 4 – 40 |
| Cover plate thickness | 4 mm | 2 – 10 |
| Front label panel width | 170 mm | 40 – 230 |
| Front label panel height | 120 mm | 30 – 180 |
| Label panel recess depth | 0.8 mm | 0 – 2.5 |
| Radome height above cover | 140 mm | 40 – 300 |
| Radome outer diameter | 22 mm | 10 – 60 |
| Radome inner diameter | 16 mm | 6 – 56 |
| Radome centre spacing | 110 mm | 20 – 220 |
| Front rim land width | 7 mm | 4 – 16 |
| Gasket groove width | 3 mm | 1 – 8 |
| Gasket groove depth | 2 mm | 0.5 – 5 |
| Screw boss diameter | 9 mm | 5 – 18 |
| Screw boss length | 30 mm | 10 – 80 |
| M4 clearance hole dia | 4.5 mm | 3 – 6 |
| M4 pilot hole dia | 3.4 mm | 2.5 – 5 |
| M4 pilot hole depth | 18 mm | 6 – 40 |
| Cable gland hole dia | 16.5 mm | 8 – 30 |
| Gland hole centre spacing | 120 mm | 40 – 200 |
| Gland pad dia increase | 8 mm | 0 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl