Brackets and mounts
Outdoor Solar Sensor Enclosure
- Bounding box
- 160 × 110 × 99 mm
- Engine
- 3D Printing B-rep
- Parameters
- 23
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
can you make me an stl design of this, The enclosure should feature: - A removable gable-style roof. - A dark forest-green ASA finish. - Six cable-entry provisions. - Solar panel and OLED mounting areas. - Internal removable electronics mounting tray. - Dedicated BH1750 and DHT22 sensor mounting provisions. - Outdoor weather-resistant construction.
Parameters
| Name | Value | Range |
|---|---|---|
| Body length X | 150 mm | 80 – 300 |
| Body width Y | 100 mm | 60 – 200 |
| Body height Z | 55 mm | 30 – 150 |
| Wall thickness | 2.5 mm | 1.6 – 5 |
| Floor thickness | 3 mm | 1.6 – 6 |
| Roof overhang | 5 mm | 0 – 15 |
| Gable rise | 45 mm | 15 – 80 |
| Roof shell thickness | 4 mm | 2 – 8 |
| Roof deck thickness | 3 mm | 1.5 – 6 |
| Cable entry hole diameter | 14 mm | 6 – 26 |
| Cable entry height | 16 mm | 8 – 60 |
| Gland boss height | 4 mm | 0 – 12 |
| Cable entry spacing | 45 mm | 20 – 80 |
| Solar pocket length | 100 mm | 40 – 160 |
| Solar pocket width | 48 mm | 20 – 100 |
| Solar panel recess depth | 2 mm | 0.6 – 5 |
| OLED window width | 30 mm | 10 – 80 |
| OLED window height | 16 mm | 8 – 60 |
| OLED window centre height | 38 mm | 12 – 120 |
| Tray plate thickness | 3 mm | 1.5 – 6 |
| Tray ledge top height | 24 mm | 10 – 120 |
| Ledge width | 5 mm | 2 – 12 |
| Ledge thickness | 3 mm | 1.5 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
