Brackets and mounts
Organicco Paddle Mixer + 2-3 tonne hopper + DN150 digestate feed & dosing valve
- Bounding box
- 4038.0 × 1870.0 × 3740.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Detailed concept parametric assembly based on the pictured 15 kW ZQ400 reducer paddle mixer GA: 4150 mm overall length, 3000 mm trough, 1048 mm mixer overall height; uncertain widths represented provisionally. Separate 1800x1700 mm sheet-steel rectangular hopper, 900mm straight plus 1150mm tapered section to 420mm throat; approx 4.3m3 gross volume corresponding to 2-3 tonnes depending on actual bulk density. 4 independently supported legs, load cell placeholders, slide isolation gate, metered motorised rotary feeder, short chute into mixer and separate DN150 digestate vertical inlet with shutoff/control-valve placeholder. Detailed representative shaft paddles, guard, lid, supports, motor, reducer. This is conceptual CAD not OEM dimensioned fabrication or verified safety/loading or mixing performance; requires bulk density, full GA and design inputs for manufacture.
Parameters
| Name | Value | Range |
|---|---|---|
| Paddle mixer overall frame length | 4150 mm | 4150 – 4150 |
| Paddle mixer overall frame width provisional | 1300 mm | 1300 – 1300 |
| Paddle mixer reference overall height | 1048 mm | 1048 – 1048 |
| Mixer trough indicative length | 3000 mm | 3000 – 3000 |
| DN150 digestate outside diameter provisional | 168.3 mm | 168.3 – 168.3 |
| Rectangular hopper length | 1800 mm | 1800 – 1800 |
| Rectangular hopper width | 1700 mm | 1700 – 1700 |
| Hopper upper straight height | 900 mm | 900 – 900 |
| Hopper funnel height | 1150 mm | 1150 – 1150 |
| Provisional hopper plate thickness | 8 mm | 8 – 8 |
| Hopper square throat | 420 mm | 420 – 420 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o