Enclosures and housings
Open-Frame ATX PC Case Skeleton
- Bounding box
- 430 × 224.2 × 461.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 24
- Published
- November 1, 2026
Download
Free to download and use. See the terms.
The prompt
/reset. Create a simple open-frame ATX PC case skeleton. Use clean angular columns, sharp geometric joints, and a tilted chassis backbone inspired by a mecha robot. Ensure all parts are valid OpenSCAD geometry blocks.
Parameters
| Name | Value | Range |
|---|---|---|
| Base plate width | 430 mm | 100 – 600 |
| Base plate depth | 220 mm | 100 – 400 |
| Base plate thickness | 12 mm | 6 – 30 |
| Motherboard backbone width | 360 mm | 200 – 500 |
| Motherboard backbone height | 300 mm | 200 – 500 |
| Motherboard backbone thickness | 8 mm | 4 – 12 |
| Backbone tilt angle | 15 deg | 5 – 30 |
| Upright column size | 28 mm | 20 – 60 |
| Upright column height incl. foot | 430 mm | 300 – 600 |
| Upright foot block height | 12 mm | 6 – 30 |
| Upright foot block width/depth | 56 mm | 40 – 100 |
| Top crossbar length | 400 mm | 300 – 600 |
| Top crossbar width | 30 mm | 20 – 60 |
| Top crossbar height | 20 mm | 10 – 40 |
| Lower front crossbar length | 360 mm | 300 – 600 |
| Lower front crossbar width | 24 mm | 16 – 50 |
| Lower front crossbar height | 18 mm | 10 – 40 |
| PSU bracket plate length | 180 mm | 120 – 250 |
| PSU bracket plate depth | 90 mm | 60 – 150 |
| PSU bracket plate thickness | 6 mm | 3 – 10 |
| PSU bracket flange height | 20 mm | 10 – 40 |
| GPU support arm length | 300 mm | 200 – 400 |
| GPU support arm width | 20 mm | 10 – 40 |
| GPU support arm height | 15 mm | 8 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no